Langsom efter opgradering til ubuntu 1704.

[K. Nielsen]

Hej.

Efter jeg opgrader til ubuntu 1704 er pc'er blevet langsom også ved opstart, enkelte gange når jeg arbejder med net, mail osv. går den helt ned hvor jeg må opstarte på ny.

Efterfølgende har jeg installeret ubuntu 1604 det samme problem.

PCer var rigtig hurtig ved opstart og stabil ved arbejde, aldrig haft problem med den skulle slukkes under arbejde, (ubuntu 1610).

Detaljer for pcer.
Hukommelse = 1,7 GiB.
Processor = AMD Athlon(tm) II X2 220 Processor × 2.
Grafik = Gallium 0.4 on AMD RS780 (DRM 2.46.0 / 4.8.0-52-generic, LLVM 3.8.0).
Os-type = 64-bit.
Disk = SSD 240 Gb.

Er der en forklaring på problemet, hvorved jeg kan få den i omdrejning igen.

På forhånd tak for svar.

[Klaus Rasmussen]

Tja, det kan jo dreje sig om flere ting. Har du lavet en clean install?

[AJenbo]

Dmesg

[K. Nielsen]

Installeret med en brændt dvd skive, hvor alt blev slettet fra Ubuntu 1704.

Bruger Compiz og Metacity.

[Klaus Rasmussen]

Prøv som Anders foreslår, at reboote og med det samme køre:

Kode: Vælg alt

dmesg

Kopiér og vis os resultatet i "codetags"

[K. Nielsen]

Her resultat efter at der er kørt DMESG i terminal.

Kode: Vælg alt

kingo@kingo-SG3-210SC:~$ dmesg
[    0.000000] Linux version 4.8.0-52-generic (buildd@lgw01-59) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #55~16.04.1-Ubuntu SMP Fri Apr 28 14:36:29 UTC 2017 (Ubuntu 4.8.0-52.55~16.04.1-generic 4.8.17)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=2ed25324-a65f-44ae-beec-8de08fddc5ea ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ffaffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ffb0000-0x000000006ffbdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006ffbe000-0x000000006ffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006ffe0000-0x000000006fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard SG3-210SC/2AAF, BIOS 6.01 04/23/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x6ffb0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFFC0000000 write-back
[    0.000000]   1 base 000040000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 000060000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff931dc00ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff931dc0092000] 92000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x0643b000, 0x0643bfff] PGTABLE
[    0.000000] BRK [0x0643c000, 0x0643cfff] PGTABLE
[    0.000000] BRK [0x0643d000, 0x0643dfff] PGTABLE
[    0.000000] BRK [0x0643e000, 0x0643efff] PGTABLE
[    0.000000] BRK [0x0643f000, 0x0643ffff] PGTABLE
[    0.000000] BRK [0x06440000, 0x06440fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33074000-0x35831fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAFB0 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x000000006FFB0100 00006C (v01 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000006FFB0290 0000F4 (v03 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20160422/tbfadt-624)
[    0.000000] ACPI: DSDT 0x000000006FFB05D0 004732 (v01 HPQOEM SLIC-CPC 00000423 INTL 20051117)
[    0.000000] ACPI: FACS 0x000000006FFBE000 000040
[    0.000000] ACPI: FACS 0x000000006FFBE000 000040
[    0.000000] ACPI: APIC 0x000000006FFB0390 00007C (v01 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x000000006FFB0410 00003C (v01 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x000000006FFB0450 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[    0.000000] ACPI: OEMB 0x000000006FFBE040 000072 (v01 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000006FFBA6B0 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
[    0.000000] ACPI: SRAT 0x000000006FFBAF00 0000A0 (v03 HPQOEM SLIC-CPC 00000002 AMD  00000001)
[    0.000000] ACPI: HPET 0x000000006FFBAFA0 000038 (v01 HPQOEM SLIC-CPC 20100423 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000006FFBAFE0 000458 (v01 HPQOEM SLIC-CPC 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0x7fffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x6ffaffff] -> [mem 0x00000000-0x6ffaffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x6ffab000-0x6ffaffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000006ffaffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000097fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000006ffaffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000006ffaffff]
[    0.000000] On node 0 totalpages: 458567
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3991 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7103 pages used for memmap
[    0.000000]   DMA32 zone: 454576 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 6 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] e820: [mem 0x70000000-0xffefffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff931e2fc00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 451379
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=2ed25324-a65f-44ae-beec-8de08fddc5ea ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0x6116000000-0x6117ffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 1744964K/1834268K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1548K init, 1296K bss, 89304K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:33024 nr_irqs:472 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2800.303 MHz processor
[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.60 BogoMIPS (lpj=11201212)
[    0.000029] pid_max: default: 32768 minimum: 301
[    0.000041] ACPI: Core revision 20160422
[    0.002286] ACPI: 3 ACPI AML tables successfully acquired and loaded

[    0.002318] Security Framework initialized
[    0.002320] Yama: becoming mindful.
[    0.002338] AppArmor: AppArmor initialized
[    0.002463] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003230] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003632] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003636] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003957] CPU: Physical Processor ID: 0
[    0.003958] CPU: Processor Core ID: 0
[    0.003959] mce: CPU supports 6 MCE banks
[    0.003965] LVT offset 0 assigned for vector 0xf9
[    0.003971] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[    0.003972] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[    0.004233] Freeing SMP alternatives memory: 32K (ffffffff9f2ed000 - ffffffff9f2f5000)
[    0.012653] ftrace: allocating 33454 entries in 131 pages
[    0.028176] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028178] smpboot: Max logical packages: 3
[    0.028618] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.175185] smpboot: CPU0: AMD Athlon(tm) II X2 220 Processor (family: 0x10, model: 0x6, stepping: 0x3)
[    0.175190] Performance Events: AMD PMU driver.
[    0.175195] ... version:                0
[    0.175195] ... bit width:              48
[    0.175196] ... generic registers:      4
[    0.175196] ... value mask:             0000ffffffffffff
[    0.175197] ... max period:             00007fffffffffff
[    0.175197] ... fixed-purpose events:   0
[    0.175198] ... event mask:             000000000000000f
[    0.175981] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.176080] x86: Booting SMP configuration:
[    0.176082] .... node  #0, CPUs:      #1
[    0.178263] x86: Booted up 1 node, 2 CPUs
[    0.178265] smpboot: Total of 2 processors activated (11201.21 BogoMIPS)
[    0.178801] devtmpfs: initialized
[    0.178888] x86/mm: Memory block size: 128MB
[    0.181775] evm: security.selinux
[    0.181776] evm: security.SMACK64
[    0.181776] evm: security.SMACK64EXEC
[    0.181776] evm: security.SMACK64TRANSMUTE
[    0.181777] evm: security.SMACK64MMAP
[    0.181777] evm: security.ima
[    0.181778] evm: security.capability
[    0.181860] PM: Registering ACPI NVS region [mem 0x6ffbe000-0x6ffdffff] (139264 bytes)
[    0.181913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.181947] pinctrl core: initialized pinctrl subsystem
[    0.182064] RTC time: 21:16:39, date: 05/21/17
[    0.182176] NET: Registered protocol family 16
[    0.194263] cpuidle: using governor ladder
[    0.206266] cpuidle: using governor menu
[    0.206269] PCCT header not found.
[    0.206273] node 0 link 0: io port [1000, ffffff]
[    0.206275] TOM: 0000000080000000 aka 2048M
[    0.206277] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.206279] node 0 link 0: mmio [a0000, bffff]
[    0.206286] node 0 link 0: mmio [80000000, cfffffff]
[    0.206287] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[    0.206289] node 0 link 0: mmio [f0000000, fe8fffff]
[    0.206290] node 0 link 0: mmio [fe900000, feafffff]
[    0.206291] node 0 link 0: mmio [feb00000, ffefffff]
[    0.206293] bus: [bus 00-07] on node 0 link 0
[    0.206294] bus: 00 [io  0x0000-0xffff]
[    0.206294] bus: 00 [mem 0x000a0000-0x000bffff]
[    0.206295] bus: 00 [mem 0x80000000-0xdfffffff]
[    0.206295] bus: 00 [mem 0xf0000000-0xfcffffffff]
[    0.206399] ACPI: bus type PCI registered
[    0.206400] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.206475] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.206476] PCI: not using MMCONFIG
[    0.206477] PCI: Using configuration type 1 for base access
[    0.206477] PCI: Using configuration type 1 for extended access
[    0.206639] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.206640] mtrr: probably your BIOS does not setup all CPUs.
[    0.206640] mtrr: corrected configuration.
[    0.218477] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.218478] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.218805] ACPI: Added _OSI(Module Device)
[    0.218807] ACPI: Added _OSI(Processor Device)
[    0.218807] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218808] ACPI: Added _OSI(Processor Aggregator Device)
[    0.219104] ACPI: Executed 3 blocks of module-level executable AML code
[    0.220564] ACPI: Interpreter enabled
[    0.220582] ACPI: (supports S0 S1 S3 S4 S5)
[    0.220584] ACPI: Using IOAPIC for interrupt routing
[    0.220632] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.221169] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.221182] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.224403] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.224408] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.224412] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.224635] PCI host bridge to bus 0000:00
[    0.224637] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.224639] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.224640] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.224642] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.224643] pci_bus 0000:00: root bus resource [mem 0x70000000-0xdfffffff window]
[    0.224644] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.224646] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.224655] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[    0.224750] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[    0.224833] pci 0000:00:0a.0: [1022:9609] type 01 class 0x060400
[    0.224864] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.224896] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.224973] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.224989] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.224998] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.225006] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.225015] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.225023] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.225032] pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
[    0.225172] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.225184] pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
[    0.225265] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.225332] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[    0.225345] pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
[    0.225426] pci 0000:00:12.1: System wakeup disabled by ACPI
[    0.225500] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.225515] pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
[    0.225591] pci 0000:00:12.2: supports D1 D2
[    0.225592] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.225629] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.225704] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.225717] pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
[    0.225797] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.225868] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[    0.225880] pci 0000:00:13.1: reg 0x10: [mem 0xfe8f7000-0xfe8f7fff]
[    0.225961] pci 0000:00:13.1: System wakeup disabled by ACPI
[    0.226032] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.226048] pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
[    0.226123] pci 0000:00:13.2: supports D1 D2
[    0.226124] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.226156] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.226230] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.226368] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.226387] pci 0000:00:14.2: reg 0x10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
[    0.226450] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.226480] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.226550] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.226709] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.226768] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.226807] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.226863] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.226918] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.226972] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.227027] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.227126] pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
[    0.227132] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.227135] pci 0000:01:05.0: reg 0x14: [io  0xd000-0xd0ff]
[    0.227139] pci 0000:01:05.0: reg 0x18: [mem 0xfeaf0000-0xfeafffff]
[    0.227147] pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
[    0.227163] pci 0000:01:05.0: supports D1 D2
[    0.227236] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.227239] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.227241] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.227243] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.227285] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    0.227298] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.227317] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[    0.227329] pci 0000:02:00.0: reg 0x20: [mem 0xfdffc000-0xfdffffff 64bit pref]
[    0.227390] pci 0000:02:00.0: supports D1 D2
[    0.227391] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.239248] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.239253] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.239255] pci 0000:00:0a.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.239258] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.239359] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[    0.239368] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.239369] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.239370] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.239371] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.239372] pci 0000:00:14.4:   bridge window [mem 0x70000000-0xdfffffff window] (subtractive decode)
[    0.239374] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.239729] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[    0.239767] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 7 10 11 12 14 15)
[    0.239803] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[    0.239839] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[    0.239874] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.239911] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.239947] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[    0.239983] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[    0.240328] SCSI subsystem initialized
[    0.240396] libata version 3.00 loaded.
[    0.240457] vgaarb: setting as boot device: PCI:0000:01:05.0
[    0.240458] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.240459] vgaarb: loaded
[    0.240460] vgaarb: bridge control possible 0000:01:05.0
[    0.240481] ACPI: bus type USB registered
[    0.240496] usbcore: registered new interface driver usbfs
[    0.240507] usbcore: registered new interface driver hub
[    0.240519] usbcore: registered new device driver usb
[    0.240630] PCI: Using ACPI for IRQ routing
[    0.248995] PCI: pci_cache_line_size set to 64 bytes
[    0.249041] e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
[    0.249042] e820: reserve RAM buffer [mem 0x6ffb0000-0x6fffffff]
[    0.249144] NetLabel: Initializing
[    0.249145] NetLabel:  domain hash size = 128
[    0.249145] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.249157] NetLabel:  unlabeled traffic allowed by default
[    0.249290] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.249294] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.251339] clocksource: Switched to clocksource hpet
[    0.260207] VFS: Disk quotas dquot_6.6.0
[    0.260235] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.260357] AppArmor: AppArmor Filesystem Enabled
[    0.260414] pnp: PnP ACPI init
[    0.260591] system 00:00: [mem 0x70000000-0x7fffffff] has been reserved
[    0.260595] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260648] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.260747] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.260749] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.260751] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260896] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.260898] system 00:03: [io  0x040b] has been reserved
[    0.260899] system 00:03: [io  0x04d6] has been reserved
[    0.260900] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.260902] system 00:03: [io  0x0c14] has been reserved
[    0.260903] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.260904] system 00:03: [io  0x0c52] has been reserved
[    0.260905] system 00:03: [io  0x0c6c] has been reserved
[    0.260906] system 00:03: [io  0x0c6f] has been reserved
[    0.260907] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.260909] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.260910] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.260911] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.260912] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.260914] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.260915] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.260916] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.260917] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.260918] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.260920] system 00:03: [io  0xfe00-0xfefe] has been reserved
[    0.260922] system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.260923] system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.260925] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261052] system 00:04: [io  0x0e00-0x0e0f] has been reserved
[    0.261053] system 00:04: [io  0x0e80-0x0e8f] has been reserved
[    0.261055] system 00:04: [io  0x0f40-0x0f4f] has been reserved
[    0.261056] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261103] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.261105] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.261209] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.261211] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.261212] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.261214] system 00:06: [mem 0x00100000-0x6fffffff] could not be reserved
[    0.261215] system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.261217] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.261299] pnp: PnP ACPI: found 7 devices
[    0.268046] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.268071] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.268074] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.268077] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.268078] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.268081] pci 0000:00:0a.0: PCI bridge to [bus 02]
[    0.268083] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.268085] pci 0000:00:0a.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.268087] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.268089] pci 0000:00:14.4: PCI bridge to [bus 03]
[    0.268102] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.268103] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.268104] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.268105] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.268107] pci_bus 0000:00: resource 8 [mem 0x70000000-0xdfffffff window]
[    0.268108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.268109] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.268110] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.268111] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.268113] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.268114] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.268115] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.268117] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.268118] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.268119] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.268120] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.268122] pci_bus 0000:03: resource 8 [mem 0x70000000-0xdfffffff window]
[    0.268123] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff window]
[    0.268168] NET: Registered protocol family 2
[    0.268349] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.268405] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.268490] TCP: Hash tables configured (established 16384 bind 16384)
[    0.268547] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.268568] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.268649] NET: Registered protocol family 1
[    0.268662] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.267575] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.267580] PCI: CLS 64 bytes, default 64
[    1.267633] Unpacking initramfs...
[    1.914603] Freeing initrd memory: 40696K (ffff931df3074000 - ffff931df5832000)
[    1.914931] LVT offset 1 assigned for vector 0x400
[    1.914936] IBS: LVT offset 1 assigned
[    1.915028] perf: AMD IBS detected (0x0000001f)
[    1.915080] Scanning for low memory corruption every 60 seconds
[    1.915508] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.915554] audit: initializing netlink subsys (disabled)
[    1.915573] audit: type=2000 audit(1495401400.800:1): initialized
[    1.915870] Initialise system trusted keyrings
[    1.916051] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    1.917673] zbud: loaded
[    1.918118] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.918434] fuse init (API version 7.25)
[    1.918639] Allocating IMA blacklist keyring.
[    1.919939] Key type asymmetric registered
[    1.919940] Asymmetric key parser 'x509' registered
[    1.919977] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.920011] io scheduler noop registered
[    1.920011] io scheduler deadline registered (default)
[    1.920019] io scheduler cfq registered
[    1.920300] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.920304] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.920334] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    1.920335] vesafb: scrolling: redraw
[    1.920336] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.920350] vesafb: framebuffer at 0xd0000000, mapped to 0xffffb2b200800000, using 5120k, total 5120k
[    1.920527] Console: switching to colour frame buffer device 160x64
[    1.920548] fb0: VESA VGA frame buffer device
[    1.920626] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.920629] ACPI: Power Button [PWRB]
[    1.920665] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.920667] ACPI: Power Button [PWRF]
[    1.920931] GHES: HEST is not enabled!
[    1.921039] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.922708] Linux agpgart interface v0.103
[    1.925689] loop: module loaded
[    1.925902] libphy: Fixed MDIO Bus: probed
[    1.925903] tun: Universal TUN/TAP device driver, 1.6
[    1.925903] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.926065] PPP generic driver version 2.4.2
[    1.926188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.926191] ehci-pci: EHCI PCI platform driver
[    1.926326] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.926332] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.926337] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.926346] ehci-pci 0000:00:12.2: debug port 1
[    1.926385] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
[    1.939248] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.939302] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.939304] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.939305] usb usb1: Product: EHCI Host Controller
[    1.939306] usb usb1: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[    1.939307] usb usb1: SerialNumber: 0000:00:12.2
[    1.939545] hub 1-0:1.0: USB hub found
[    1.939552] hub 1-0:1.0: 6 ports detected
[    1.939918] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.939923] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.939929] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.939938] ehci-pci 0000:00:13.2: debug port 1
[    1.939972] ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
[    1.955242] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.955302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.955303] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.955304] usb usb2: Product: EHCI Host Controller
[    1.955305] usb usb2: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[    1.955306] usb usb2: SerialNumber: 0000:00:13.2
[    1.955574] hub 2-0:1.0: USB hub found
[    1.955580] hub 2-0:1.0: 6 ports detected
[    1.955815] ehci-platform: EHCI generic platform driver
[    1.955830] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.955837] ohci-pci: OHCI PCI platform driver
[    1.956017] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.956024] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.956047] ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
[    2.019284] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.019286] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.019287] usb usb3: Product: OHCI PCI host controller
[    2.019288] usb usb3: Manufacturer: Linux 4.8.0-52-generic ohci_hcd
[    2.019289] usb usb3: SerialNumber: 0000:00:12.0
[    2.019523] hub 3-0:1.0: USB hub found
[    2.019560] hub 3-0:1.0: 3 ports detected
[    2.019783] ohci-pci 0000:00:12.1: OHCI PCI host controller
[    2.019788] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[    2.019811] ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
[    2.083268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.083270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.083271] usb usb4: Product: OHCI PCI host controller
[    2.083272] usb usb4: Manufacturer: Linux 4.8.0-52-generic ohci_hcd
[    2.083273] usb usb4: SerialNumber: 0000:00:12.1
[    2.083520] hub 4-0:1.0: USB hub found
[    2.083562] hub 4-0:1.0: 3 ports detected
[    2.083790] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.083797] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.083826] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
[    2.147301] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.147303] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.147304] usb usb5: Product: OHCI PCI host controller
[    2.147305] usb usb5: Manufacturer: Linux 4.8.0-52-generic ohci_hcd
[    2.147306] usb usb5: SerialNumber: 0000:00:13.0
[    2.147500] hub 5-0:1.0: USB hub found
[    2.147544] hub 5-0:1.0: 3 ports detected
[    2.147796] ohci-pci 0000:00:13.1: OHCI PCI host controller
[    2.147802] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.147824] ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8f7000
[    2.211308] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.211310] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.211311] usb usb6: Product: OHCI PCI host controller
[    2.211312] usb usb6: Manufacturer: Linux 4.8.0-52-generic ohci_hcd
[    2.211313] usb usb6: SerialNumber: 0000:00:13.1
[    2.211585] hub 6-0:1.0: USB hub found
[    2.211621] hub 6-0:1.0: 3 ports detected
[    2.211730] ohci-platform: OHCI generic platform driver
[    2.211744] uhci_hcd: USB Universal Host Controller Interface driver
[    2.211808] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.212341] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.212344] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.212545] mousedev: PS/2 mouse device common for all mice
[    2.212679] rtc_cmos 00:01: RTC can wake from S4
[    2.212828] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.212851] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.212856] i2c /dev entries driver
[    2.212917] device-mapper: uevent: version 1.0.3
[    2.213016] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    2.213039] ledtrig-cpu: registered to indicate activity on CPUs
[    2.213431] NET: Registered protocol family 10
[    2.213737] NET: Registered protocol family 17
[    2.213744] Key type dns_resolver registered
[    2.214053] microcode: CPU0: patch_level=0x010000b6
[    2.214058] microcode: CPU1: patch_level=0x010000b6
[    2.214113] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.214237] registered taskstats version 1
[    2.214241] Loading compiled-in X.509 certificates
[    2.217602] Loaded X.509 cert 'Build time autogenerated kernel key: b2e5ac4e062fe412675f5b442a7ba1394ee14efb'
[    2.217632] zswap: loaded using pool lzo/zbud
[    2.235337] Key type big_key registered
[    2.237333] Key type trusted registered
[    2.239339] Key type encrypted registered
[    2.239345] AppArmor: AppArmor sha1 policy hashing enabled
[    2.239347] ima: No TPM chip found, activating TPM-bypass!
[    2.239370] evm: HMAC attrs: 0x1
[    2.239658]   Magic number: 1:520:298
[    2.239807] rtc_cmos 00:01: setting system clock to 2017-05-21 21:16:42 UTC (1495401402)
[    2.239956] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.240290] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.240290] EDD information not available.
[    2.240338] PM: Hibernation image not present or could not be loaded.
[    2.242047] Freeing unused kernel memory: 1548K (ffffffff9f16a000 - ffffffff9f2ed000)
[    2.242049] Write protecting the kernel read-only data: 14336k
[    2.242892] Freeing unused kernel memory: 1396K (ffff931dc5aa3000 - ffff931dc5c00000)
[    2.243719] Freeing unused kernel memory: 260K (ffff931dc5fbf000 - ffff931dc6000000)
[    2.252157] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.270680] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.270748] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.270759] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.270773] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.273113] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.273149] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.274046] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.274097] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.274418] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.274468] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.308912] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    2.313094] wmi: Mapper loaded
[    2.319351] ahci 0000:00:11.0: version 3.0
[    2.319626] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.319628] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    2.320866] [drm] Initialized drm 1.1.0 20060810
[    2.321605] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.321618] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.322024] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffb2b2003dc000, d4:85:64:a3:d5:14, XID 0c200000 IRQ 25
[    2.322026] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.327335] scsi host0: ahci
[    2.335341] scsi host1: ahci
[    2.339654] scsi host2: ahci
[    2.358560] scsi host3: ahci
[    2.358689] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[    2.358691] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[    2.358693] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[    2.358695] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[    2.366555] [drm] radeon kernel modesetting enabled.
[    2.370990] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    2.370991] AMD IOMMUv2 functionality not available on this system
[    2.375234] CRAT table not found
[    2.375236] Finished initializing topology ret=0
[    2.375254] kfd kfd: Initialized module
[    2.375995] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[    2.375996] fb: switching to radeondrmfb from VESA VGA
[    2.376027] Console: switching to colour dummy device 80x25
[    2.376349] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x103C:0x2AA9 0x00).
[    2.376706] [drm] register mmio base: 0xFEAF0000
[    2.376707] [drm] register mmio size: 65536
[    2.378066] ATOM BIOS: BR35874.bin
[    2.378093] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[    2.378095] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[    2.378099] [drm] Detected VRAM RAM=256M, BAR=256M
[    2.378099] [drm] RAM width 32bits DDR
[    2.378206] [TTM] Zone  kernel: Available graphics memory: 894448 kiB
[    2.378207] [TTM] Initializing pool allocator
[    2.378426] [TTM] Initializing DMA pool allocator
[    2.378452] [drm] radeon: 256M of VRAM memory ready
[    2.378452] [drm] radeon: 512M of GTT memory ready.
[    2.378464] [drm] Loading RS780 Microcode
[    2.378534] [drm] radeon: power management initialized
[    2.378538] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.387819] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[    2.397285] radeon 0000:01:05.0: WB enabled
[    2.397288] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff931df482cc00
[    2.397290] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.397290] [drm] Driver supports precise vblank timestamp query.
[    2.397291] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
[    2.397305] [drm] radeon: irq initialized.
[    2.399371] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.429594] [drm] ring test on 0 succeeded in 1 usecs
[    2.429687] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.430441] [drm] Radeon Display Connectors
[    2.430442] [drm] Connector 0:
[    2.430443] [drm]   VGA-1
[    2.430444] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    2.430444] [drm]   Encoders:
[    2.430445] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.430445] [drm] Connector 1:
[    2.430446] [drm]   DVI-D-1
[    2.430446] [drm]   HPD1
[    2.430447] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    2.430448] [drm]   Encoders:
[    2.430448] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
[    2.472377] [drm] fb mappable at 0xD0141000
[    2.472378] [drm] vram apper at 0xD0000000
[    2.472379] [drm] size 5242880
[    2.472379] [drm] fb depth is 24
[    2.472380] [drm]    pitch is 5120
[    2.472526] fbcon: radeondrmfb (fb0) is primary device
[    2.472605] Console: switching to colour frame buffer device 160x64
[    2.472627] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[    2.491271] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:05.0 on minor 0
[    2.535182] usb 3-3: new low-speed USB device number 2 using ohci-pci
[    2.547185] usb 5-1: new full-speed USB device number 2 using ohci-pci
[    2.682701] ata4: SATA link down (SStatus 0 SControl 300)
[    2.724250] usb 3-3: New USB device found, idVendor=046d, idProduct=c517
[    2.724252] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.724253] usb 3-3: Product: USB Receiver
[    2.724254] usb 3-3: Manufacturer: Logitech
[    2.729203] usb 5-1: New USB device found, idVendor=093a, idProduct=262c
[    2.729206] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.730597] hidraw: raw HID events driver (C) Jiri Kosina
[    2.744304] usbcore: registered new interface driver usbhid
[    2.744306] usbhid: USB HID core driver
[    2.748158] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/0003:046D:C517.0001/input/input5
[    2.807348] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-3/input0
[    2.807366] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    2.807984] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.1/0003:046D:C517.0002/input/input6
[    2.835153] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.835293] ata1.00: ATA-9: OCZ-TRION100, SAFM11.2, max UDMA/133
[    2.835295] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.835514] ata1.00: configured for UDMA/133
[    2.835771] scsi 0:0:0:0: Direct-Access     ATA      OCZ-TRION100     11.2 PQ: 0 ANSI: 5
[    2.839161] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.841540] ata2.00: ATAPI: hp       CDDVDW TS-H653R, 0K00, max UDMA/100
[    2.843155] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.843972] ata2.00: configured for UDMA/100
[    2.844202] ata3.00: ATA-8: Hitachi HDS721032CLA362, JPFOA3GH, max UDMA/133
[    2.844204] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.845402] ata3.00: configured for UDMA/133
[    2.867369] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-3/input1
[    2.867465] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.867528] sd 0:0:0:0: [sda] Write Protect is off
[    2.867530] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.867546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.867617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.868908]  sda: sda1 sda2 sda3
[    2.869265] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.869660] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-H653R  0K00 PQ: 0 ANSI: 5
[    2.894348] sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.894350] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.894510] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.894622] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.894957] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72103 A3GH PQ: 0 ANSI: 5
[    2.923138] tsc: Refined TSC clocksource calibration: 2800.000 MHz
[    2.923143] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns
[    2.931325] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.931408] sd 2:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.931445] sd 2:0:0:0: [sdb] Write Protect is off
[    2.931447] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.931461] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.981816]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    2.982246] sd 2:0:0:0: [sdb] Attached SCSI disk
[    3.162209] random: fast init done
[    3.203111] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    3.353004] usb 2-2: New USB device found, idVendor=05e3, idProduct=0605
[    3.353006] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.353007] usb 2-2: Product: USB2.0 Hub
[    3.353445] hub 2-2:1.0: USB hub found
[    3.353750] hub 2-2:1.0: 4 ports detected
[    3.643059] usb 2-2.4: new high-speed USB device number 4 using ehci-pci
[    3.758786] usb 2-2.4: New USB device found, idVendor=04f9, idProduct=0322
[    3.758788] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.758790] usb 2-2.4: Product: DCP-L2520DW
[    3.758791] usb 2-2.4: Manufacturer: Brother
[    3.758792] usb 2-2.4: SerialNumber: E73921G6N720376
[    3.813585] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[    3.947081] clocksource: Switched to clocksource tsc
[    4.911822] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.911958] systemd[1]: Detected architecture x86-64.
[    4.931660] systemd[1]: Set hostname to <kingo-SG3-210SC>.
[    5.452853] random: crng init done
[    6.891631] systemd[1]: Reached target User and Group Name Lookups.
[    6.891855] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.891867] systemd[1]: Reached target Encrypted Volumes.
[    6.891945] systemd[1]: Listening on Journal Audit Socket.
[    6.891991] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.892020] systemd[1]: Listening on LVM2 metadata daemon socket.
[    6.892038] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.407209] lp: driver loaded but no devices found
[    8.439417] ppdev: user-space parallel port driver
[    9.922641] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[   10.318445] systemd-journald[242]: Received request to flush runtime journal from PID 1
[   10.427196] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   10.427347] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   10.669455] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.981664] kvm: disabled by bios
[   11.155451] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   11.155455] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.155466] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.155467] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.155468] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.155469] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   11.155471] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   11.155472] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   11.166266] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   11.166429] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   11.166518] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   11.166608] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   11.166688] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   13.082351] media: Linux media interface: v0.10
[   13.241371] Linux video capture interface: v2.00
[   13.244549] gspca_main: v2.14.0 registered
[   13.391060] gspca_main: gspca_pac7302-2.14.0 probing 093a:262c
[   13.399105] input: gspca_pac7302 as /devices/pci0000:00/0000:00:13.0/usb5/5-1/input/input12
[   13.399244] usbcore: registered new interface driver gspca_pac7302
[   13.543194] usbcore: registered new interface driver snd-usb-audio
[   23.767167] Adding 1832956k swap on /dev/sdb5.  Priority:-1 extents:1 across:1832956k FS
[   27.681569] audit: type=1400 audit(1495401427.939:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=715 comm="apparmor_parser"
[   27.681576] audit: type=1400 audit(1495401427.939:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=715 comm="apparmor_parser"
[   27.681581] audit: type=1400 audit(1495401427.939:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=715 comm="apparmor_parser"
[   27.681584] audit: type=1400 audit(1495401427.939:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=715 comm="apparmor_parser"
[   27.681938] audit: type=1400 audit(1495401427.939:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=714 comm="apparmor_parser"
[   27.681949] audit: type=1400 audit(1495401427.939:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=714 comm="apparmor_parser"
[   27.932112] audit: type=1400 audit(1495401428.191:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=718 comm="apparmor_parser"
[   27.932122] audit: type=1400 audit(1495401428.191:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=718 comm="apparmor_parser"
[   27.934122] audit: type=1400 audit(1495401428.191:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=719 comm="apparmor_parser"
[   27.934134] audit: type=1400 audit(1495401428.191:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=719 comm="apparmor_parser"
[   32.462532] usblp 2-2.4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0322
[   32.462574] usbcore: registered new interface driver usblp
[   34.361149] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   34.748873] r8169 0000:02:00.0 enp2s0: link down
[   34.748892] r8169 0000:02:00.0 enp2s0: link down
[   34.748992] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   36.362594] r8169 0000:02:00.0 enp2s0: link up
[   36.362605] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   37.630389] audit_printk_skb: 39 callbacks suppressed
[   37.630392] audit: type=1400 audit(1495401437.887:25): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1074 comm="usb" capability=35  capname="wake_alarm"
[   37.792263] usblp1: removed
[   37.792318] audit: type=1400 audit(1495401438.051:26): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1074 comm="usb" capability=35  capname="wake_alarm"
[   37.800559] usblp 2-2.4:1.0: usblp1: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0322
[   42.470108] Non-volatile memory driver v1.3
kingo@kingo-SG3-210SC:~$

[AJenbo]

Det er lidt et gæt, men måske er det det video optagelses kort du har siddende i maskinen

[K. Nielsen]

Har måske fundet ud af hvor problemet er, der er 2 harddiske , når jeg tager stik fra SSD vil den ikke starte og hvis jeg fjerne stik fra HDD vil den ikke starte, så der må problemet være , hvordan fejlen er opstået er en gåde, nu må jeg nok installerer Ubuntu på ny.