Problem med systemprogram

Alle tekniske spørgsmål som ikke hører ind under de andre fora.
Klaus Rasmussen
Admin
Indlæg: 5605
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Problem med systemprogram

Indlæg af Klaus Rasmussen »

I nogen tid nu, måske siden install af 17.04, har jeg oplevet efter reboot, at der kommer en lille fejlmelding: Problem med systemprogram. Hvordan er det lige jeg finder ud af hvilket? Tilsyneladende fungerer systemet OK.
Med Venlig Hilsen
Klaus

Kører Ubuntu 24.04.1 på ASUS All-Series, og Probook 4520s.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
https://mega.nz/folder/aJsmCYKa#dxMHKTi4Idmz6hiVpsI68Q
AJenbo
Admin
Indlæg: 20878
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: Problem med systemprogram

Indlæg af AJenbo »

Dmesg
Klaus Rasmussen
Admin
Indlæg: 5605
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: Problem med systemprogram

Indlæg af Klaus Rasmussen »

Kode: Vælg alt

klaus@klaus-HP-ProBook-4520s:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x4, date = 2013-06-28
[    0.000000] Linux version 4.10.0-22-generic (buildd@lcy01-08) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #24-Ubuntu SMP Mon May 22 17:43:20 UTC 2017 (Ubuntu 4.10.0-22.24-generic 4.10.15)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=f811db6d-0918-48a5-8d30-1bb0d9365063 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bafcefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bafcf000-0x00000000bb6cefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb6cf000-0x00000000bb7cefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb7cf000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed19000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP ProBook 4520s/1413, BIOS 68AZZ Ver. F.0B 09/16/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 100000000 mask FC0000000 write-back
[    0.000000]   5 base 138000000 mask FF8000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff95cd40099000] 99000 size 24576
[    0.000000] BRK [0x2ca28000, 0x2ca28fff] PGTABLE
[    0.000000] BRK [0x2ca29000, 0x2ca29fff] PGTABLE
[    0.000000] BRK [0x2ca2a000, 0x2ca2afff] PGTABLE
[    0.000000] BRK [0x2ca2b000, 0x2ca2bfff] PGTABLE
[    0.000000] BRK [0x2ca2c000, 0x2ca2cfff] PGTABLE
[    0.000000] BRK [0x2ca2d000, 0x2ca2dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x32e07000-0x356fafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FDDC0 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BB7FE120 000084 (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 0x00000000BB7FC000 0000F4 (v03 HPQOEM 1413     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000BB7D8000 01EC27 (v02 HPQOEM 1413     00000001 INTL 20060912)
[    0.000000] ACPI: FACS 0x00000000BB77E000 000040
[    0.000000] ACPI: FACS 0x00000000BB77E000 000040
[    0.000000] ACPI: HPET 0x00000000BB7FB000 000038 (v01 HPQOEM 1413     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000BB7FA000 0000BC (v01 HPQOEM 1413     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000BB7F9000 00003C (v01 HPQOEM 1413     00000001 HP   00000001)
[    0.000000] ACPI: ASF! 0x00000000BB7F8000 0000A0 (v32 HPQOEM 1413     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000BB7D5000 000135 (v01 HPQOEM SataAhci 00001000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BB7D4000 000314 (v01 HPQOEM PtidDevc 00001000 INTL 20060912)
[    0.000000] ACPI: SLIC 0x00000000BB7D3000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000BB7D2000 00005F (v01 HPQOEM HPQNLP   00000001 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BB7D1000 000A10 (v01 PmRef  CpuPm    00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BB7D0000 000288 (v01 PmRef  Cpu0Tst  00003000 INTL 20060912)
[    0.000000] ACPI: SSDT 0x00000000BB7CF000 000225 (v01 PmRef  ApTst    00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x137fd2000-0x137ffcfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bafcefff]
[    0.000000]   node   0: [mem 0x00000000bb7ff000-0x00000000bb7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[    0.000000] On node 0 totalpages: 995182
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11904 pages used for memmap
[    0.000000]   DMA32 zone: 761808 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000be000000-0x00000000bfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbafcf000-0xbb6cefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb6cf000-0xbb7cefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb7cf000-0xbb7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb800000-0xbbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed18fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed19000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff95ce77c00000 s107992 r8192 d31272 u262144
[    0.000000] pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 979609
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-22-generic root=UUID=f811db6d-0918-48a5-8d30-1bb0d9365063 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3787180K/3980728K available (9082K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 193548K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:524544 nr_irqs:488 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.057 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=9576228)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20160930
[    0.012192] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.012226] Security Framework initialized
[    0.012227] Yama: becoming mindful.
[    0.012248] AppArmor: AppArmor initialized
[    0.012513] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013557] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.014009] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014014] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.014315] CPU: Physical Processor ID: 0
[    0.014316] CPU: Processor Core ID: 0
[    0.014322] mce: CPU supports 9 MCE banks
[    0.014330] CPU0: Thermal monitoring enabled (TM1)
[    0.014339] process: using mwait in idle threads
[    0.014342] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.014343] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.014503] Freeing SMP alternatives memory: 32K
[    0.016566] ftrace: allocating 34178 entries in 134 pages
[    0.035715] smpboot: Max logical packages: 4
[    0.036225] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.183129] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.183191] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.183211] core: CPUID marked event: 'bus cycles' unavailable
[    0.183213] ... version:                3
[    0.183214] ... bit width:              48
[    0.183214] ... generic registers:      4
[    0.183215] ... value mask:             0000ffffffffffff
[    0.183216] ... max period:             000000007fffffff
[    0.183216] ... fixed-purpose events:   3
[    0.183217] ... event mask:             000000070000000f
[    0.184208] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.184232] smp: Bringing up secondary CPUs ...
[    0.184324] x86: Booting SMP configuration:
[    0.184325] .... node  #0, CPUs:      #1 #2 #3
[    0.192186] smp: Brought up 1 node, 4 CPUs
[    0.192190] smpboot: Total of 4 processors activated (19152.45 BogoMIPS)
[    0.194818] devtmpfs: initialized
[    0.194888] x86/mm: Memory block size: 128MB
[    0.197127] evm: security.selinux
[    0.197128] evm: security.SMACK64
[    0.197128] evm: security.SMACK64EXEC
[    0.197129] evm: security.SMACK64TRANSMUTE
[    0.197129] evm: security.SMACK64MMAP
[    0.197130] evm: security.ima
[    0.197130] evm: security.capability
[    0.197201] PM: Registering ACPI NVS region [mem 0xbb6cf000-0xbb7cefff] (1048576 bytes)
[    0.197285] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.197303] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.197372] pinctrl core: initialized pinctrl subsystem
[    0.197499] RTC time: 10:02:39, date: 06/10/17
[    0.197599] NET: Registered protocol family 16
[    0.209491] cpuidle: using governor ladder
[    0.225487] cpuidle: using governor menu
[    0.225490] PCCT header not found.
[    0.225576] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.225577] ACPI: bus type PCI registered
[    0.225579] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.225652] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.225692] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.225704] PCI: Using configuration type 1 for base access
[    0.225923] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.225924] mtrr: probably your BIOS does not setup all CPUs.
[    0.225924] mtrr: corrected configuration.
[    0.239333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.239601] ACPI: Added _OSI(Module Device)
[    0.239601] ACPI: Added _OSI(Processor Device)
[    0.239602] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.239603] ACPI: Added _OSI(Processor Aggregator Device)
[    0.239848] ACPI: Executed 2 blocks of module-level executable AML code
[    0.245699] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.263267] ACPI: Dynamic OEM Table Load:
[    0.263275] ACPI: SSDT 0xFFFF95CE72A33000 00043B (v01 PmRef  Cpu0Ist  00003000 INTL 20060912)
[    0.263492] ACPI: Dynamic OEM Table Load:
[    0.263498] ACPI: SSDT 0xFFFF95CE72AE1000 0008AA (v01 PmRef  Cpu0Cst  00003001 INTL 20060912)
[    0.263978] ACPI: Dynamic OEM Table Load:
[    0.263984] ACPI: SSDT 0xFFFF95CE72B61400 000303 (v01 PmRef  ApIst    00003000 INTL 20060912)
[    0.264210] ACPI: Dynamic OEM Table Load:
[    0.264215] ACPI: SSDT 0xFFFF95CE72B15800 000119 (v01 PmRef  ApCst    00003000 INTL 20060912)
[    0.264998] ACPI : EC: EC started
[    0.264999] ACPI : EC: interrupt blocked
[    0.714283] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.714285] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.714286] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.714287] ACPI: Interpreter enabled
[    0.714309] ACPI: (supports S0 S3 S4 S5)
[    0.714310] ACPI: Using IOAPIC for interrupt routing
[    0.714335] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.716241] ACPI: Power Resource [APPR] (off)
[    0.718081] ACPI: Power Resource [COMP] (on)
[    0.718289] ACPI: Power Resource [LPP] (on)
[    0.722272] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.722278] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.723810] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.723811] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.724374] PCI host bridge to bus 0000:00
[    0.724377] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.724378] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.724379] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.724380] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[    0.724382] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[    0.724383] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    0.724385] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.724393] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.724420] DMAR: Disabling batched IOTLB flush on Ironlake
[    0.724506] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.724516] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[    0.724521] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.724525] pci 0000:00:02.0: reg 0x20: [io  0x4030-0x4037]
[    0.724658] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.724684] pci 0000:00:16.0: reg 0x10: [mem 0xd4704000-0xd470400f 64bit]
[    0.724783] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.724884] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.724906] pci 0000:00:1a.0: reg 0x10: [mem 0xd4709000-0xd47093ff]
[    0.725016] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.725069] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.725114] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.725137] pci 0000:00:1b.0: reg 0x10: [mem 0xd4700000-0xd4703fff 64bit]
[    0.725251] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.725314] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.725358] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.725475] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.725574] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.725685] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.725745] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.725789] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.725900] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.725959] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.726008] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.726029] pci 0000:00:1d.0: reg 0x10: [mem 0xd4708000-0xd47083ff]
[    0.726141] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.726193] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.726233] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.726360] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.726398] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.726594] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.726616] pci 0000:00:1f.2: reg 0x10: [io  0x4028-0x402f]
[    0.726627] pci 0000:00:1f.2: reg 0x14: [io  0x403c-0x403f]
[    0.726637] pci 0000:00:1f.2: reg 0x18: [io  0x4020-0x4027]
[    0.726648] pci 0000:00:1f.2: reg 0x1c: [io  0x4038-0x403b]
[    0.726658] pci 0000:00:1f.2: reg 0x20: [io  0x4000-0x401f]
[    0.726669] pci 0000:00:1f.2: reg 0x24: [mem 0xd4707000-0xd47077ff]
[    0.726736] pci 0000:00:1f.2: PME# supported from D3hot
[    0.726832] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.726858] pci 0000:00:1f.6: reg 0x10: [mem 0xd4706000-0xd4706fff 64bit]
[    0.727075] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.727082] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.727203] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[    0.727207] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.727211] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd45fffff]
[    0.727319] pci 0000:43:00.0: [1814:3090] type 00 class 0x028000
[    0.727349] pci 0000:43:00.0: reg 0x10: [mem 0xd0500000-0xd050ffff]
[    0.727613] pci 0000:43:00.0: System wakeup disabled by ACPI
[    0.741502] pci 0000:00:1c.3: PCI bridge to [bus 43]
[    0.741515] pci 0000:00:1c.3:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.741618] pci 0000:00:1e.0: PCI bridge to [bus 44] (subtractive decode)
[    0.741625] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.741632] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.741633] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.741634] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.741636] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[    0.741637] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff window] (subtractive decode)
[    0.741638] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff window] (subtractive decode)
[    0.742617] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.742670] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    0.742721] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.742773] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.742824] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.742875] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.742927] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.742978] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.743027] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.743031] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.743034] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.743114] PCI host bridge to bus 0000:ff
[    0.743116] pci_bus 0000:ff: root bus resource [bus ff]
[    0.743121] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.743171] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.743224] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.743269] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.743313] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.743357] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.743709] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.743771] ACPI : EC: interrupt unblocked
[    0.743779] ACPI : EC: event unblocked
[    0.743786] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.743788] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.744093] SCSI subsystem initialized
[    0.744146] libata version 3.00 loaded.
[    0.744193] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.744194] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.744198] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.744198] vgaarb: loaded
[    0.744221] ACPI: bus type USB registered
[    0.744238] usbcore: registered new interface driver usbfs
[    0.744245] usbcore: registered new interface driver hub
[    0.744262] usbcore: registered new device driver usb
[    0.744388] PCI: Using ACPI for IRQ routing
[    0.754374] PCI: pci_cache_line_size set to 64 bytes
[    0.754457] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.754459] e820: reserve RAM buffer [mem 0xbafcf000-0xbbffffff]
[    0.754460] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.754566] NetLabel: Initializing
[    0.754566] NetLabel:  domain hash size = 128
[    0.754567] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.754585] NetLabel:  unlabeled traffic allowed by default
[    0.754708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.754713] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.756744] clocksource: Switched to clocksource hpet
[    0.765807] VFS: Disk quotas dquot_6.6.0
[    0.765837] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.765952] AppArmor: AppArmor Filesystem Enabled
[    0.766020] pnp: PnP ACPI init
[    0.766376] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.766378] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.766379] system 00:00: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.766381] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.766382] system 00:00: [mem 0xd4800000-0xd4800fff] has been reserved
[    0.766384] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.766385] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.766386] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.766388] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.766393] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.766533] system 00:01: [io  0xfe00-0xfe0f] has been reserved
[    0.766535] system 00:01: [io  0xfe80-0xfe8f] has been reserved
[    0.766536] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.766539] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.766633] system 00:02: [io  0x0200-0x027f] has been reserved
[    0.766635] system 00:02: [io  0x1000-0x100f] has been reserved
[    0.766636] system 00:02: [io  0xffff] has been reserved
[    0.766638] system 00:02: [io  0xffff] has been reserved
[    0.766639] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.766640] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.766642] system 00:02: [io  0xef80-0xef9f] has been reserved
[    0.766644] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.766673] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.766838] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.766862] pnp 00:05: Plug and Play ACPI device, IDs SYN016a SYN0100 SYN0002 PNP0f13 (active)
[    0.767281] pnp: PnP ACPI: found 6 devices
[    0.773819] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.773848] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-42] add_size 200000 add_align 100000
[    0.773870] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.773871] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.773879] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd4900000-0xd4afffff 64bit pref]
[    0.773882] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.773888] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.773898] pci 0000:00:1c.1: PCI bridge to [bus 02-42]
[    0.773901] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.773906] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd45fffff]
[    0.773911] pci 0000:00:1c.1:   bridge window [mem 0xd4900000-0xd4afffff 64bit pref]
[    0.773918] pci 0000:00:1c.3: PCI bridge to [bus 43]
[    0.773923] pci 0000:00:1c.3:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.773934] pci 0000:00:1e.0: PCI bridge to [bus 44]
[    0.773939] pci 0000:00:1e.0:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.773950] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.773951] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.773953] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.773954] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[    0.773955] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.773956] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.773958] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
[    0.773959] pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
[    0.773960] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd45fffff]
[    0.773962] pci_bus 0000:02: resource 2 [mem 0xd4900000-0xd4afffff 64bit pref]
[    0.773963] pci_bus 0000:43: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.773965] pci_bus 0000:44: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.773966] pci_bus 0000:44: resource 4 [io  0x0000-0x0cf7 window]
[    0.773967] pci_bus 0000:44: resource 5 [io  0x0d00-0xffff window]
[    0.773968] pci_bus 0000:44: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.773970] pci_bus 0000:44: resource 7 [mem 0xc0000000-0xdfffffff window]
[    0.773971] pci_bus 0000:44: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.773972] pci_bus 0000:44: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.774071] NET: Registered protocol family 2
[    0.774282] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.774365] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.774477] TCP: Hash tables configured (established 32768 bind 32768)
[    0.774513] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.774534] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.774592] NET: Registered protocol family 1
[    0.774607] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.775374] PCI: CLS 64 bytes, default 64
[    0.775429] Unpacking initramfs...
[    1.507628] Freeing initrd memory: 41936K
[    1.507634] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.507637] software IO TLB [mem 0xb6fcf000-0xbafcf000] (64MB) mapped at [ffff95cdf6fcf000-ffff95cdfafcefff]
[    1.507929] Scanning for low memory corruption every 60 seconds
[    1.508378] audit: initializing netlink subsys (disabled)
[    1.508420] audit: type=2000 audit(1497088960.392:1): initialized
[    1.508816] Initialise system trusted keyrings
[    1.508917] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.510447] zbud: loaded
[    1.510930] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.511140] fuse init (API version 7.26)
[    1.512588] Key type asymmetric registered
[    1.512589] Asymmetric key parser 'x509' registered
[    1.512632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.512669] io scheduler noop registered
[    1.512669] io scheduler deadline registered
[    1.512678] io scheduler cfq registered (default)
[    1.513746] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    1.513770] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    1.513793] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    1.513814] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.513879] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.513880] vesafb: scrolling: redraw
[    1.513881] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.513894] vesafb: framebuffer at 0xc0000000, mapped to 0xffffbf0741000000, using 4160k, total 4160k
[    1.514000] Console: switching to colour frame buffer device 170x48
[    1.514031] fb0: VESA VGA frame buffer device
[    1.514043] intel_idle: MWAIT substates: 0x1120
[    1.514044] intel_idle: v0.4.1 model 0x25
[    1.514201] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.514365] ACPI: AC Adapter [AC] (on-line)
[    1.514432] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.514436] ACPI: Sleep Button [SLPB]
[    1.514499] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.514506] ACPI: Lid Switch [LID]
[    1.514543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.514545] ACPI: Power Button [PWRF]
[    1.520275] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.520908] thermal LNXTHERM:00: registered as thermal_zone0
[    1.520910] ACPI: Thermal Zone [EXTZ] (71 C)
[    1.520979] thermal LNXTHERM:01: registered as thermal_zone1
[    1.520980] ACPI: Thermal Zone [EX2Z] (0 C)
[    1.521052] thermal LNXTHERM:02: registered as thermal_zone2
[    1.521052] ACPI: Thermal Zone [PWMZ] (0 C)
[    1.524165] thermal LNXTHERM:03: registered as thermal_zone3
[    1.524166] ACPI: Thermal Zone [LOCZ] (50 C)
[    1.524675] thermal LNXTHERM:04: registered as thermal_zone4
[    1.524676] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.539653] thermal LNXTHERM:05: registered as thermal_zone5
[    1.539654] ACPI: Thermal Zone [BATZ] (26 C)
[    1.554315] thermal LNXTHERM:06: registered as thermal_zone6
[    1.554316] ACPI: Thermal Zone [EGXZ] (0 C)
[    1.554574] thermal LNXTHERM:07: registered as thermal_zone7
[    1.554575] ACPI: Thermal Zone [CPUZ] (82 C)
[    1.554795] thermal LNXTHERM:08: registered as thermal_zone8
[    1.554796] ACPI: Thermal Zone [MCHZ] (78 C)
[    1.555009] thermal LNXTHERM:09: registered as thermal_zone9
[    1.555010] ACPI: Thermal Zone [PCHZ] (70 C)
[    1.555039] GHES: HEST is not enabled!
[    1.555155] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.557443] Linux agpgart interface v0.103
[    1.561456] loop: module loaded
[    1.561640] libphy: Fixed MDIO Bus: probed
[    1.561641] tun: Universal TUN/TAP device driver, 1.6
[    1.561641] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.561687] PPP generic driver version 2.4.2
[    1.561744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.561747] ehci-pci: EHCI PCI platform driver
[    1.561976] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.561983] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.561998] ehci-pci 0000:00:1a.0: debug port 2
[    1.565919] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.565933] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4709000
[    1.580801] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.580946] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.580948] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.580949] usb usb1: Product: EHCI Host Controller
[    1.580950] usb usb1: Manufacturer: Linux 4.10.0-22-generic ehci_hcd
[    1.580951] usb usb1: SerialNumber: 0000:00:1a.0
[    1.581163] hub 1-0:1.0: USB hub found
[    1.581179] hub 1-0:1.0: 2 ports detected
[    1.581520] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.581524] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.581537] ehci-pci 0000:00:1d.0: debug port 2
[    1.585516] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.585527] ehci-pci 0000:00:1d.0: irq 20, io mem 0xd4708000
[    1.600798] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.600886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.600890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.600893] usb usb2: Product: EHCI Host Controller
[    1.600896] usb usb2: Manufacturer: Linux 4.10.0-22-generic ehci_hcd
[    1.600901] usb usb2: SerialNumber: 0000:00:1d.0
[    1.601101] hub 2-0:1.0: USB hub found
[    1.601114] hub 2-0:1.0: 2 ports detected
[    1.601268] ehci-platform: EHCI generic platform driver
[    1.601279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.601282] ohci-pci: OHCI PCI platform driver
[    1.601291] ohci-platform: OHCI generic platform driver
[    1.601297] uhci_hcd: USB Universal Host Controller Interface driver
[    1.601430] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.603146] i8042: Detected active multiplexing controller, rev 1.1
[    1.603940] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.603944] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.603977] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.604002] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.604025] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.604360] mousedev: PS/2 mouse device common for all mice
[    1.604792] rtc_cmos 00:03: RTC can wake from S4
[    1.604959] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.604989] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.604995] i2c /dev entries driver
[    1.605052] device-mapper: uevent: version 1.0.3
[    1.605127] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.605218] ledtrig-cpu: registered to indicate activity on CPUs
[    1.605645] NET: Registered protocol family 10
[    1.610563] Segment Routing with IPv6
[    1.610606] NET: Registered protocol family 17
[    1.610625] Key type dns_resolver registered
[    1.611416] microcode: sig=0x20655, pf=0x10, revision=0x4
[    1.611534] microcode: Microcode Update Driver: v2.2.
[    1.611959] registered taskstats version 1
[    1.611978] Loading compiled-in X.509 certificates
[    1.612700] ACPI: Battery Slot [BAT0] (battery present)
[    1.615330] Loaded X.509 cert 'Build time autogenerated kernel key: a167cdd0c8d1eea96632c95731fa483a527957b7'
[    1.615355] zswap: loaded using pool lzo/zbud
[    1.629624] Key type big_key registered
[    1.629632] Key type trusted registered
[    1.632134] Key type encrypted registered
[    1.632140] AppArmor: AppArmor sha1 policy hashing enabled
[    1.632146] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.632196] evm: HMAC attrs: 0x1
[    1.632674]   Magic number: 5:770:21
[    1.632963] rtc_cmos 00:03: setting system clock to 2017-06-10 10:02:41 UTC (1497088961)
[    1.633849] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.633850] EDD information not available.
[    1.633897] PM: Hibernation image not present or could not be loaded.
[    1.636191] Freeing unused kernel memory: 2228K
[    1.636193] Write protecting the kernel read-only data: 14336k
[    1.636711] Freeing unused kernel memory: 1144K
[    1.637460] Freeing unused kernel memory: 280K
[    1.639109] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.647037] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.661124] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.661203] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.661214] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.661224] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.661785] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.661820] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.663332] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.663392] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.663450] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.663508] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.691736] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    1.707876] wmi: Mapper loaded
[    1.716820] ahci 0000:00:1f.2: version 3.0
[    1.717242] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.717289] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x13 impl SATA mode
[    1.717292] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[    1.717990] [drm] Initialized
[    1.741915] scsi host0: ahci
[    1.742267] scsi host1: ahci
[    1.742393] scsi host2: ahci
[    1.742515] scsi host3: ahci
[    1.748737] scsi host4: ahci
[    1.748900] scsi host5: ahci
[    1.748974] ata1: SATA max UDMA/133 abar m2048@0xd4707000 port 0xd4707100 irq 27
[    1.748977] ata2: SATA max UDMA/133 abar m2048@0xd4707000 port 0xd4707180 irq 27
[    1.748978] ata3: DUMMY
[    1.748979] ata4: DUMMY
[    1.748982] ata5: SATA max UDMA/133 abar m2048@0xd4707000 port 0xd4707300 irq 27
[    1.748983] ata6: DUMMY
[    1.760922] pci 0000:00:00.0: Intel HD Graphics Chipset
[    1.760947] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.761504] pci 0000:00:00.0: detected 32768K stolen memory
[    1.761605] [drm] Memory usable by graphics device = 2048M
[    1.761609] checking generic (c0000000 410000) vs hw (c0000000 10000000)
[    1.761610] fb: switching to inteldrmfb from VESA VGA
[    1.761647] Console: switching to colour dummy device 80x25
[    1.761764] [drm] Replacing VGA console driver
[    1.770039] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.770041] [drm] Driver supports precise vblank timestamp query.
[    1.772905] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.814617] [drm] RC6 disabled, disabling runtime PM support
[    1.817811] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.821161] acpi device:0d: registered as cooling_device4
[    1.821318] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[    1.821480] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    1.852318] fbcon: inteldrmfb (fb0) is primary device
[    1.852467] Console: switching to colour frame buffer device 170x48
[    1.852518] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.912799] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.928813] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.061219] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    2.061222] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.061677] hub 1-1:1.0: USB hub found
[    2.061841] hub 1-1:1.0: 6 ports detected
[    2.064530] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.065460] ata1.00: unexpected _GTF length (8)
[    2.065731] ata1.00: ATA-8: ST9320423AS, 0006HPM1, max UDMA/100
[    2.065735] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.066746] ata1.00: unexpected _GTF length (8)
[    2.066980] ata1.00: configured for UDMA/100
[    2.067436] scsi 0:0:0:0: Direct-Access     ATA      ST9320423AS      HPM1 PQ: 0 ANSI: 5
[    2.077440] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    2.077445] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.077951] hub 2-1:1.0: USB hub found
[    2.078115] hub 2-1:1.0: 8 ports detected
[    2.101072] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.101167] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    2.101196] sd 0:0:0:0: [sda] Write Protect is off
[    2.101198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.101238] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.182029]  sda: sda1 sda2 < sda5 > sda3
[    2.183140] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.305186] random: fast init done
[    2.348753] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
[    2.364755] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    2.416249] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.425701] ata2.00: unexpected _GTF length (8)
[    2.425705] ata2.00: ATAPI: hp      DVD RW AD-7586H, KH04, max UDMA/100
[    2.439347] ata2.00: unexpected _GTF length (8)
[    2.439353] ata2.00: configured for UDMA/100
[    2.442448] scsi 1:0:0:0: CD-ROM            hp       DVD RW AD-7586H  KH04 PQ: 0 ANSI: 5
[    2.474764] usb 2-1.2: New USB device found, idVendor=13fd, idProduct=2040
[    2.474769] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.474772] usb 2-1.2: Product: USB Mass Storage Device
[    2.474775] usb 2-1.2: Manufacturer: TSSTcorp
[    2.474778] usb 2-1.2: SerialNumber: SATAHH0000000054a25
[    2.475496] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.475499] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.475659] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.475761] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.479242] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    2.479365] scsi host6: usb-storage 2-1.2:1.0
[    2.479442] usbcore: registered new interface driver usb-storage
[    2.487866] psmouse serio4: synaptics: queried max coordinates: x [..5686], y [..4548]
[    2.488898] usb 1-1.5: New USB device found, idVendor=0461, idProduct=4db6
[    2.488902] usb 1-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.488905] usb 1-1.5: Product: Villem
[    2.488908] usb 1-1.5: Manufacturer: Primax Electronics Ltd.
[    2.488910] usb 1-1.5: SerialNumber: PMX01
[    2.508781] tsc: Refined TSC clocksource calibration: 2393.988 MHz
[    2.508790] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2282083b12d, max_idle_ns: 440795306543 ns
[    2.552724] usb 2-1.3: new low-speed USB device number 4 using ehci-pci
[    2.558177] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400/0x0, board id: 0, fw id: 640916
[    2.602721] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input11
[    2.666161] usb 2-1.3: New USB device found, idVendor=1bcf, idProduct=0005
[    2.666164] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.666166] usb 2-1.3: Product: USB Optical Mouse
[    2.673603] hidraw: raw HID events driver (C) Jiri Kosina
[    2.678815] usbcore: registered new interface driver usbhid
[    2.678817] usbhid: USB HID core driver
[    2.680595] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:1BCF:0005.0001/input/input13
[    2.680758] hid-generic 0003:1BCF:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[    2.748768] usb 2-1.6: new full-speed USB device number 5 using ehci-pci
[    2.792463] ata5: SATA link down (SStatus 0 SControl 300)
[    3.071588] usb 2-1.6: New USB device found, idVendor=148f, idProduct=1000
[    3.071593] usb 2-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.501886] scsi 6:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S224Q  TS02 PQ: 0 ANSI: 0
[    3.507329] sr 6:0:0:0: [sr1] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.507561] sr 6:0:0:0: Attached scsi CD-ROM sr1
[    3.507668] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    3.533012] clocksource: Switched to clocksource tsc
[    8.473230] random: crng init done
[   16.132132] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   17.658740] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.789060] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   17.789208] systemd[1]: Detected architecture x86-64.
[   17.801909] systemd[1]: Set hostname to <klaus-HP-ProBook-4520s>.
[   19.253582] systemd[1]: Listening on udev Kernel Socket.
[   19.253677] systemd[1]: Listening on fsck to fsckd communication Socket.
[   19.253715] systemd[1]: Listening on Syslog Socket.
[   19.253729] systemd[1]: Reached target Remote File Systems.
[   19.253742] systemd[1]: Reached target User and Group Name Lookups.
[   19.253773] systemd[1]: Listening on Journal Socket (/dev/log).
[   19.253819] systemd[1]: Listening on Journal Socket.
[   19.888115] lp: driver loaded but no devices found
[   20.525826] ppdev: user-space parallel port driver
[   29.420034] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   29.430752] systemd-journald[276]: Received request to flush runtime journal from PID 1
[   29.606151] Adding 2097148k swap on /swapfile.  Priority:-1 extents:6 across:2260988k FS
[   29.950144] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[   29.950151] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950154] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950157] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950161] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950164] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   30.191921] audit: type=1400 audit(1497088990.052:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=513 comm="apparmor_parser"
[   30.191924] audit: type=1400 audit(1497088990.056:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=512 comm="apparmor_parser"
[   30.193966] audit: type=1400 audit(1497088990.056:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_i2p" pid=516 comm="apparmor_parser"
[   30.195119] audit: type=1400 audit(1497088990.056:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=517 comm="apparmor_parser"
[   30.195337] audit: type=1400 audit(1497088990.056:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=515 comm="apparmor_parser"
[   30.195339] audit: type=1400 audit(1497088990.056:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=515 comm="apparmor_parser"
[   30.195341] audit: type=1400 audit(1497088990.056:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=515 comm="apparmor_parser"
[   30.195343] audit: type=1400 audit(1497088990.056:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=515 comm="apparmor_parser"
[   30.195725] audit: type=1400 audit(1497088990.056:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=514 comm="apparmor_parser"
[   30.195727] audit: type=1400 audit(1497088990.056:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=514 comm="apparmor_parser"
[   30.329878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.603988] media: Linux media interface: v0.10
[   30.627816] Linux video capture interface: v2.00
[   31.013169] Bluetooth: Core ver 2.22
[   31.013195] NET: Registered protocol family 31
[   31.013196] Bluetooth: HCI device and connection manager initialized
[   31.013200] Bluetooth: HCI socket layer initialized
[   31.013202] Bluetooth: L2CAP socket layer initialized
[   31.013208] Bluetooth: SCO socket layer initialized
[   31.016993] uvcvideo: Found UVC 1.00 device Villem (0461:4db6)
[   31.024893] uvcvideo 1-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[   31.024899] uvcvideo 1-1.5:1.0: Entity type for entity Processing 3 was not initialized!
[   31.024903] uvcvideo 1-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   31.025054] input: Villem as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[   31.025124] usbcore: registered new interface driver uvcvideo
[   31.025125] USB Video Class driver (1.1.1)
[   31.038925] Blacklisted intel_ips for HP ProBook
[   31.044896] hp_accel: hardware type HPB452x found
[   31.045562] lis3lv02d: 8 bits sensor found
[   31.087992] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[   31.113068] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   31.353355] usbcore: registered new interface driver btusb
[   31.601426] Bluetooth: hci0 hardware error 0x37
[   32.000030] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3090, rev 3213 detected
[   32.005208] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   32.091345] input: HP WMI hotkeys as /devices/virtual/input/input16
[   32.262381] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   32.264304] rt2800pci 0000:43:00.0 wlo1: renamed from wlan0
[   32.840296] vboxdrv: loading out-of-tree module taints kernel.
[   32.840526] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   32.845281] vboxdrv: Found 4 processor cores
[   32.864087] vboxdrv: TSC mode is Invariant, tentative frequency 2393987954 Hz
[   32.864088] vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
[   32.937111] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   32.937113] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.937114] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   32.937115] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   32.937116] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   32.937118] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[   32.937120] snd_hda_codec_idt hdaudioC0D0:      Mic=0xa
[   33.107620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   33.107622] Bluetooth: BNEP filters: protocol multicast
[   33.107626] Bluetooth: BNEP socket layer initialized
[   33.117987] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   33.138779] VBoxNetFlt: Successfully started.
[   33.353411] VBoxNetAdp: Successfully started.
[   33.395891] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   33.397368] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   33.397514] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   33.471004] VBoxPciLinuxInit
[   33.756196] vboxpci: IOMMU not found (not registered)
[   34.991624] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   34.991674] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
[   35.225067] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40
[   35.436798] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   35.644898] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   36.092910] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   37.732648] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   37.796289] wlo1: authenticate with a4:2b:8c:95:1d:d6
[   37.820643] wlo1: send auth to a4:2b:8c:95:1d:d6 (try 1/3)
[   37.823068] wlo1: authenticated
[   37.823746] wlo1: associate with a4:2b:8c:95:1d:d6 (try 1/3)
[   37.827306] wlo1: RX AssocResp from a4:2b:8c:95:1d:d6 (capab=0x1411 status=0 aid=3)
[   37.827419] wlo1: associated
[   37.827465] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   40.848683] Bluetooth: RFCOMM TTY layer initialized
[   40.848691] Bluetooth: RFCOMM socket layer initialized
[   40.848698] Bluetooth: RFCOMM ver 1.11
[   51.754861] systemd[1]: snapd.refresh.timer: Adding 3h 33min 29.788958s random time.
[   51.754870] systemd[1]: snapd.refresh.timer: Adding 1h 37min 2.469113s random time.
[   51.755122] systemd[1]: motd-news.timer: Adding 45min 54.311334s random time.
[   51.755411] systemd[1]: apt-daily.timer: Adding 10h 15min 4.187861s random time.
[   61.967405] systemd[1]: snapd.refresh.timer: Adding 3h 58min 20.787800s random time.
[   61.967419] systemd[1]: snapd.refresh.timer: Adding 3h 38min 91.997ms random time.
[   61.967808] systemd[1]: motd-news.timer: Adding 51min 21.007844s random time.
[   61.968262] systemd[1]: apt-daily.timer: Adding 5h 46min 33.014330s random time.
[   71.877389] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[   72.401237] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[   72.948550] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[   73.491520] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 0 failed to flush
[   73.697974] ieee80211 phy0: rt2x00queue_flush_queue: Warning - Queue 2 failed to flush
[   92.937164] wlo1: authenticate with a4:2b:8c:95:1d:d6
[   92.985192] wlo1: send auth to a4:2b:8c:95:1d:d6 (try 1/3)
[   92.988685] wlo1: authenticated
[   92.992308] wlo1: associate with a4:2b:8c:95:1d:d6 (try 1/3)
[   92.995784] wlo1: RX AssocResp from a4:2b:8c:95:1d:d6 (capab=0x1411 status=0 aid=3)
[   92.995908] wlo1: associated
[  102.904125] wlo1: authenticate with a4:2b:8c:95:1d:d6
[  102.951913] wlo1: send auth to a4:2b:8c:95:1d:d6 (try 1/3)
[  102.955565] wlo1: authenticated
[  102.959428] wlo1: associate with a4:2b:8c:95:1d:d6 (try 1/3)
[  102.966112] wlo1: RX AssocResp from a4:2b:8c:95:1d:d6 (capab=0x1411 status=0 aid=3)
[  102.966222] wlo1: associated
[  140.933757] wlo1: authenticate with a4:2b:8c:95:1d:d6
[  140.981447] wlo1: send auth to a4:2b:8c:95:1d:d6 (try 1/3)
[  140.985282] wlo1: authenticated
[  140.988803] wlo1: associate with a4:2b:8c:95:1d:d6 (try 1/3)
[  140.994680] wlo1: RX AssocResp from a4:2b:8c:95:1d:d6 (capab=0x1411 status=0 aid=3)
[  140.994789] wlo1: associated
klaus@klaus-HP-ProBook-4520s:~$


Kan man også se, hvorfor den gik ned kort forinden?
Med Venlig Hilsen
Klaus

Kører Ubuntu 24.04.1 på ASUS All-Series, og Probook 4520s.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
https://mega.nz/folder/aJsmCYKa#dxMHKTi4Idmz6hiVpsI68Q
AJenbo
Admin
Indlæg: 20878
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: Problem med systemprogram

Indlæg af AJenbo »

Måske i din syslog
Klaus Rasmussen
Admin
Indlæg: 5605
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: Problem med systemprogram

Indlæg af Klaus Rasmussen »

dmesg giver bla. dette, kan det være problemet?

Kode: Vælg alt

[   29.950144] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[   29.950151] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950154] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950157] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950161] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Med Venlig Hilsen
Klaus

Kører Ubuntu 24.04.1 på ASUS All-Series, og Probook 4520s.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
https://mega.nz/folder/aJsmCYKa#dxMHKTi4Idmz6hiVpsI68Q
AJenbo
Admin
Indlæg: 20878
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: Problem med systemprogram

Indlæg af AJenbo »

Jeg hade troet det var under opstarten du blot fik en fejl tekst, ikke at det var en dialog der kom frem efter opstarten.

Tryk rapporter og se hvad problemet drejer sig om ved at vise detaljer.

Har du prøvet at indsende den?

Hvis den samme kommer hvergang kan det være at der er en rapport som den ikke formår at slette efter den er sendt, du kan så gøre det manuelt:

Kode: Vælg alt

sudo rm /var/crash/*
AJenbo
Admin
Indlæg: 20878
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: Problem med systemprogram

Indlæg af AJenbo »

Klaus Rasmussen skrev:dmesg giver bla. dette, kan det være problemet?

Kode: Vælg alt

[   29.950144] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[   29.950151] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950154] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950157] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   29.950161] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   29.950163] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

Det er blot advarsler og uden at vide hvad fejlrapporten egentlig handler om er det umuligt at sige hvad årsagen er.
Klaus Rasmussen
Admin
Indlæg: 5605
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: Problem med systemprogram

Indlæg af Klaus Rasmussen »

Der ligger disse 2:
Vedhæftede filer
Skaermbillede.png
Skaermbillede.png (40.74 KiB) Vist 1439 gange
Med Venlig Hilsen
Klaus

Kører Ubuntu 24.04.1 på ASUS All-Series, og Probook 4520s.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
https://mega.nz/folder/aJsmCYKa#dxMHKTi4Idmz6hiVpsI68Q
AJenbo
Admin
Indlæg: 20878
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: Problem med systemprogram

Indlæg af AJenbo »

Når beskeden kommer så tryk på "Rapporter problem", der efter på "Fortsæt" og hvad der nu ellers er nødvendigt for at indrapportere problemet.

Får du samme besked ved næste opstart så slet filerne med den kommando jeg har givet dig.

Får du fortsat beskeden så tryk på "Vis detaljer" frem for "Fortsæt" og vis os hvad der står der så vi kan se hvad problemet drejer sig om.
Klaus Rasmussen
Admin
Indlæg: 5605
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: Problem med systemprogram

Indlæg af Klaus Rasmussen »

Jeg slettede filerne med din kommando efter at have taget billedet herover. Derefter rebootede jeg, og det ser ud til at være overstået nu. Takker for hjælpen. :)
Med Venlig Hilsen
Klaus

Kører Ubuntu 24.04.1 på ASUS All-Series, og Probook 4520s.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
https://mega.nz/folder/aJsmCYKa#dxMHKTi4Idmz6hiVpsI68Q