ingen grafik-drivere

Forum for support til grafik og lydkort.
zob
Redaktør
Indlæg: 4430
Tilmeldt: 6. jan 2009, 22:01
Geografisk sted: København

Re: ingen grafik-drivere

Indlægaf zob » 6. feb 2014, 20:24

Måske også output af

Kode: Vælg alt

xrandr

Kode: Vælg alt

dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'


Kode: Vælg alt

cat /var/log/Xorg.0.log | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'

Klaus Rasmussen
Admin
Indlæg: 4846
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: ingen grafik-drivere

Indlægaf Klaus Rasmussen » 6. feb 2014, 21:20

dmesg

Kode: Vælg alt

[    0.311070] msgmni has been set to 1661
[    0.311809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.311865] io scheduler noop registered
[    0.311870] io scheduler deadline registered
[    0.311885] io scheduler cfq registered (default)
[    0.312265] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.312315] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.312662] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.312677] ACPI: Sleep Button [SLPB]
[    0.312789] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.312798] ACPI: Power Button [PWRF]
[    0.316133] ERST: Table is not found!
[    0.316138] GHES: HEST is not enabled!
[    0.316384] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.336747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.336845] isapnp: Scanning for PnP cards...
[    0.689888] Freeing initrd memory: 13872k freed
[    0.690985] isapnp: No Plug & Play device found
[    0.752533] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.764387] Linux agpgart interface v0.103
[    0.764654] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.767853] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    0.770496] brd: module loaded
[    0.771840] loop: module loaded
[    0.772150] ata_piix 0000:00:1f.1: version 2.13
[    0.772169] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    0.772180] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.772242] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.772785] scsi0 : ata_piix
[    0.772936] scsi1 : ata_piix
[    0.774124] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.774129] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.774171] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.774180] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.774259] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.774705] scsi2 : ata_piix
[    0.774839] scsi3 : ata_piix
[    0.775931] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 18
[    0.775936] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 18
[    0.776693] Fixed MDIO Bus: probed
[    0.776730] tun: Universal TUN/TAP device driver, 1.6
[    0.776733] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.776841] PPP generic driver version 2.4.2
[    0.777051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.777081] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.777111] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.777117] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.777200] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.777241] ehci_hcd 0000:00:1d.7: debug port 1
[    0.781124] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.781148] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[    0.796025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.796272] hub 1-0:1.0: USB hub found
[    0.796280] hub 1-0:1.0: 8 ports detected
[    0.796417] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.796441] uhci_hcd: USB Universal Host Controller Interface driver
[    0.796474] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.796486] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.796491] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.796579] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.796620] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000cc00
[    0.796840] hub 2-0:1.0: USB hub found
[    0.796848] hub 2-0:1.0: 2 ports detected
[    0.796954] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.796964] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.796968] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.797047] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.797083] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[    0.797300] hub 3-0:1.0: USB hub found
[    0.797306] hub 3-0:1.0: 2 ports detected
[    0.797416] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.797426] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.797431] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.797507] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.797533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[    0.797748] hub 4-0:1.0: USB hub found
[    0.797755] hub 4-0:1.0: 2 ports detected
[    0.797853] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.797867] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.797872] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.797956] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.797982] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[    0.798194] hub 5-0:1.0: USB hub found
[    0.798201] hub 5-0:1.0: 2 ports detected
[    0.798386] usbcore: registered new interface driver libusual
[    0.798466] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.801741] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.801753] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.801985] mousedev: PS/2 mouse device common for all mice
[    0.802258] rtc_cmos 00:02: RTC can wake from S4
[    0.802396] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.802423] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    0.802519] device-mapper: uevent: version 1.0.3
[    0.802648] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.802684] EISA: Probing bus 0 at eisa.0
[    0.802725] EISA: Detected 0 cards.
[    0.802741] cpufreq-nforce2: No nForce2 chipset.
[    0.802745] cpuidle: using governor ladder
[    0.802749] cpuidle: using governor menu
[    0.802752] EFI Variables Facility v0.08 2004-May-17
[    0.803176] TCP cubic registered
[    0.803364] NET: Registered protocol family 10
[    0.804338] NET: Registered protocol family 17
[    0.804346] Registering the dns_resolver key type
[    0.804379] Using IPI No-Shortcut mode
[    0.804573] PM: Hibernation image not present or could not be loaded.
[    0.804595] registered taskstats version 1
[    0.816036]   Magic number: 2:808:642
[    0.816155] rtc_cmos 00:02: setting system clock to 2014-02-06 17:38:46 UTC (1391708326)
[    0.816186] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.816189] EDD information not available.
[    0.943120] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB02, max UDMA/33
[    0.948567] ata3.00: ATA-8: WDC WD10EACS-00D6B1, 01.01A01, max UDMA/133
[    0.948573] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.956239] ata2.00: configured for UDMA/33
[    0.956595] ata3.00: configured for UDMA/133
[    0.959244] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB02 PQ: 0 ANSI: 5
[    0.964398] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.964403] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.964622] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.964811] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    0.965053] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EACS-00D 01.0 PQ: 0 ANSI: 5
[    0.965266] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    0.965331] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.965402] sd 2:0:0:0: [sda] Write Protect is off
[    0.965409] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.965476] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.979399]  sda: sda2 < sda5 sda6 >
[    0.979934] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.980031] Freeing unused kernel memory: 744k freed
[    0.980800] Write protecting the kernel text: 5844k
[    0.980833] Write protecting the kernel read-only data: 2388k
[    1.012567] udevd[93]: starting version 175
[    1.175389] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.175399] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.175480] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.175498] e1000 0000:02:01.0: setting latency timer to 64
[    1.201992] Floppy drive(s): fd0 is 1.44M
[    1.218032] FDC 0 is a National Semiconductor PC87306
[    1.223047] firewire_ohci 0000:03:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.268099] Refined TSC clocksource calibration: 2992.499 MHz.
[    1.268112] Switching to clocksource tsc
[    1.276452] firewire_ohci: Added fw-ohci device 0000:03:07.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.333216] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[    1.443978] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.468361] Initializing USB Mass Storage driver...
[    1.468543] scsi4 : usb-storage 1-4:1.0
[    1.468705] usbcore: registered new interface driver usb-storage
[    1.468710] USB Mass Storage support registered.
[    1.610631] e1000 0000:02:01.0: eth0: (PCI:33MHz:32-bit) 00:13:20:3a:9d:9c
[    1.610643] e1000 0000:02:01.0: eth0: Intel(R) PRO/1000 Network Connection
[    1.704040] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[    1.776182] firewire_core: created device fw0: GUID 00132000003a9d9c, S400
[    2.120030] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[    2.470950] scsi 4:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S224Q  TS02 PQ: 0 ANSI: 0
[    2.476048] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.476257] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    2.476392] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    2.536044] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.708869] hub 3-1:1.0: USB hub found
[    2.710812] hub 3-1:1.0: 4 ports detected
[    2.993775] usb 3-1.1: new full-speed USB device number 3 using uhci_hcd
[    3.097758] usb 3-1.1: not running at top speed; connect to a high speed hub
[   15.810273] Adding 2618364k swap on /dev/sda5.  Priority:-1 extents:1 across:2618364k
[   15.824902] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.857889] udevd[312]: starting version 175
[   15.908626] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   15.927053] lp: driver loaded but no devices found
[   15.935555] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.125719] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   16.446976] ppdev: user-space parallel port driver
[   16.451637] Bluetooth: Core ver 2.16
[   16.451711] NET: Registered protocol family 31
[   16.451718] Bluetooth: HCI device and connection manager initialized
[   16.451724] Bluetooth: HCI socket layer initialized
[   16.451730] Bluetooth: L2CAP socket layer initialized
[   16.451743] Bluetooth: SCO socket layer initialized
[   16.460484] parport_pc 00:07: reported by Plug and Play ACPI
[   16.460540] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   16.464820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.464829] Bluetooth: BNEP filters: protocol multicast
[   16.466053] Bluetooth: RFCOMM TTY layer initialized
[   16.466068] Bluetooth: RFCOMM socket layer initialized
[   16.466074] Bluetooth: RFCOMM ver 1.11
[   16.478845] type=1400 audit(1391708342.157:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=525 comm="apparmor_parser"
[   16.556667] lp0: using parport0 (interrupt-driven).
[   16.595155] type=1400 audit(1391708342.273:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=574 comm="apparmor_parser"
[   16.603410] type=1400 audit(1391708342.281:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=574 comm="apparmor_parser"
[   16.672188] type=1400 audit(1391708342.353:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=603 comm="apparmor_parser"
[   16.675861] type=1400 audit(1391708342.353:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=603 comm="apparmor_parser"
[   16.677917] intel_rng: FWH not detected
[   16.678347] type=1400 audit(1391708342.357:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=603 comm="apparmor_parser"
[   16.808595] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[   16.809046] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1/input0
[   16.835024] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[   16.836367] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.0-2/input0
[   16.842086] cfg80211: Calling CRDA to update world regulatory domain
[   16.863539] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.863588] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   16.900243] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[   16.902578] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
[   16.902629] usbcore: registered new interface driver usblp
[   16.902803] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.0-2/input1
[   16.902847] usbcore: registered new interface driver usbhid
[   16.902852] usbhid: USB HID core driver
[   17.002172] ath9k 0000:03:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.236167] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.667680] intel8x0_measure_ac97_clock: measured 76111 usecs (3663 samples)
[   17.667686] intel8x0: clocking to 48000
[   17.680962] init: failsafe main process (684) killed by TERM signal
[   18.096667] type=1400 audit(1391708343.777:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=800 comm="apparmor_parser"
[   18.097465] type=1400 audit(1391708343.777:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=800 comm="apparmor_parser"
[   18.105011] type=1400 audit(1391708343.785:10): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=799 comm="apparmor_parser"
[   18.113637] type=1400 audit(1391708343.793:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[   18.184882] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   18.188448] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[   18.330358] cfg80211: World regulatory domain updated:
[   18.330365] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.330372] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.330378] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.330383] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.330388] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.330394] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.567108] ath: EEPROM regdomain: 0x809c
[   18.567115] ath: EEPROM indicates we should expect a country code
[   18.567120] ath: doing EEPROM country->regdmn map search
[   18.567125] ath: country maps to regdmn code: 0x52
[   18.567130] ath: Country alpha2 being used: CN
[   18.567134] ath: Regpair used: 0x52
[   18.567469] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.567478] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567484] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.567489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567495] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.567502] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567508] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.567515] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567520] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.567526] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567531] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.567537] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567543] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.567549] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567555] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.567562] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567567] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.567573] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567578] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.567583] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567588] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.567594] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.567599] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.567604] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.567610] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.570952] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.570960] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570966] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.570973] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570978] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.570985] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.570990] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.570996] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571001] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.571007] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571012] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.571019] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571024] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.571030] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571035] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.571041] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571046] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.571052] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571057] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.571063] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571069] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.571075] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.571080] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.571087] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.571092] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.571098] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.571103] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.571109] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.583695] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.586573] cfg80211: Calling CRDA for country: CN
[   18.587947] Registered led device: ath9k-phy0
[   18.587965] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xf87c0000, irq=17
[   18.634100] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.634111] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634117] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.634124] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634129] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.634136] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634142] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.634151] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634158] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.634165] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634172] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.634179] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634184] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.634192] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634198] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.634205] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634211] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.634218] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634225] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.634232] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634238] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.634244] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634250] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.634257] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634263] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.634269] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.634274] cfg80211: Disabling freq 2484 MHz
[   18.634282] cfg80211: Regulatory domain changed to country: CN
[   18.634286] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.634293] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   18.634299] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[   18.755933] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.756755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.811085] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.818776] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.933588] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   18.933594] vesafb: scrolling: redraw
[   18.933600] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[   18.934798] vesafb: framebuffer at 0xe0000000, mapped to 0xf8a80000, using 1216k, total 1216k
[   18.942213] Console: switching to colour frame buffer device 80x30
[   18.942246] fb0: VESA VGA frame buffer device
[   19.480828] init: lightdm main process (1048) killed by TERM signal
[   19.792541] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   19.792551] Disabling lock debugging due to kernel taint
[   20.803115] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   20.804271] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[   20.804278] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[   21.518030] wlan0: authenticate with e0:69:95:1c:e8:85 (try 1)
[   21.520180] wlan0: authenticated
[   21.542625] wlan0: associate with e0:69:95:1c:e8:85 (try 1)
[   21.546582] wlan0: RX AssocResp from e0:69:95:1c:e8:85 (capab=0x411 status=0 aid=2)
[   21.546594] wlan0: associated
[   21.558883] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   26.947061] audit_printk_skb: 123 callbacks suppressed
[   26.947069] type=1400 audit(1391708352.625:53): apparmor="ALLOWED" operation="open" parent=869 profile="/usr/sbin/dnsmasq" name="/etc/NetworkManager/dnsmasq.d/" pid=1644 comm="dnsmasq" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   31.648023] wlan0: no IPv6 routers present
[ 2305.820732] irq 16: nobody cared (try booting with the "irqpoll" option)
[ 2305.820742] Pid: 0, comm: swapper/0 Tainted: P           O 3.2.0-58-generic-pae #88-Ubuntu
[ 2305.820746] Call Trace:
[ 2305.820759]  [<c15961eb>] ? printk+0x2d/0x2f
[ 2305.820769]  [<c10c1679>] __report_bad_irq+0x29/0xd0
[ 2305.820774]  [<c10c1a34>] note_interrupt+0x104/0x150
[ 2305.820780]  [<c101901d>] ? mwait_idle+0x7d/0x1d0
[ 2305.820785]  [<c10bf8ee>] handle_irq_event_percpu+0x9e/0x1f0
[ 2305.820793]  [<c1036a38>] ? default_spin_lock_flags+0x8/0x10
[ 2305.820799]  [<c102dbc0>] ? unmask_ioapic+0x50/0x60
[ 2305.820803]  [<c10bfa7b>] handle_irq_event+0x3b/0x60
[ 2305.820808]  [<c10c2240>] ? unmask_irq+0x30/0x30
[ 2305.820813]  [<c10c228e>] handle_fasteoi_irq+0x4e/0xd0
[ 2305.820816]  <IRQ>  [<c15b3ad2>] ? do_IRQ+0x42/0xc0
[ 2305.820826]  [<c15b3930>] ? common_interrupt+0x30/0x38
[ 2305.820833]  [<c14800e0>] ? centrino_target+0xc0/0x300
[ 2305.820837]  [<c101901d>] ? mwait_idle+0x7d/0x1d0
[ 2305.820843]  [<c1010898>] ? cpu_idle+0xa8/0xd0
[ 2305.820848]  [<c1578d65>] ? rest_init+0x5d/0x68
[ 2305.820855]  [<c188077c>] ? start_kernel+0x352/0x358
[ 2305.820860]  [<c18803bb>] ? pass_bootoption.constprop.2+0xe2/0xe2
[ 2305.820865]  [<c18800ba>] ? i386_start_kernel+0xa9/0xaf
[ 2305.820868] handlers:
[ 2305.820872] [<c1413520>] usb_hcd_irq
[ 2305.820876] [<c1413520>]

Den er så lang at starten ikke er med.

xrandr:

Kode: Vælg alt

klaus@klaus-desktop:~$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
   1280x1024       0.0*
   1152x864        0.0 
   1024x768        0.0 
   800x600         0.0 
   640x480         0.0 
   720x400         0.0 
klaus@klaus-desktop:~$


dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)':

Kode: Vælg alt

klaus@klaus-desktop:~$     dmesg | egrep 'abort|ailed|error|fail|fgl|GLX|GPU|intel|issing|nouveau|nvidia|NVIDIA|radeon|segment|VESA|VGA|wfb|\(EE\)|\(WW\)'
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.764654] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[    0.767853] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[   15.908626] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   16.677917] intel_rng: FWH not detected
[   16.863539] snd_intel8x0 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   16.863588] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[   17.236167] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   17.667680] intel8x0_measure_ac97_clock: measured 76111 usecs (3663 samples)
[   17.667686] intel8x0: clocking to 48000
[   17.680962] init: failsafe main process (684) killed by TERM signal
[   18.942246] fb0: VESA VGA frame buffer device
[   19.792541] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   20.803115] [fglrx] Maximum main memory to use for locked dma buffers: 2877 MBytes.
[   20.804271] [fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[   20.804278] [fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 9351.367528] [<f877aa00>] snd_intel8x0_interrupt
klaus@klaus-desktop:~$
Med Venlig Hilsen
Klaus

Kører Ubuntu 20.04 på Lenovo-H515s, 64bit og 20.10 på HP Probook 4520s, 64 bit.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
MEGA Share: https://mega.nz/#F!XNM1ALpL!G_CEVUUE9ZvotKPa4o4PLA

AJenbo
Admin
Indlæg: 20525
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: ingen grafik-drivere

Indlægaf AJenbo » 6. feb 2014, 22:21

Det ser ud til at du har fglrx installeret selv om du ikke har et kort der er undersøttet, prøv at fjern den med følgende kommando:

Kode: Vælg alt

sudo apt-get purge fglrx*

AJenbo
Admin
Indlæg: 20525
Tilmeldt: 15. nov 2009, 15:04
IRC nickname: AJenbo
Geografisk sted: Vanløse, København

Re: ingen grafik-drivere

Indlægaf AJenbo » 6. feb 2014, 22:23

Klaus Rasmussen skrev:dmesg
...
Den er så lang at starten ikke er med.

Det er bedst at køre den i starten så du ikke får beskeder fra alle mulige events der sker efter systemet er starte, jeg kan se du har kørt den mindt 38min efter at maskinen blev tætn.

Klaus Rasmussen
Admin
Indlæg: 4846
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: ingen grafik-drivere

Indlægaf Klaus Rasmussen » 6. feb 2014, 22:41

Kørte denne:

Kode: Vælg alt

sudo apt-get purge fglrx*

Rebootede og så var problemet løst-------tror jeg. Opløsningen er nu 1680x1050
Med Venlig Hilsen
Klaus

Kører Ubuntu 20.04 på Lenovo-H515s, 64bit og 20.10 på HP Probook 4520s, 64 bit.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
MEGA Share: https://mega.nz/#F!XNM1ALpL!G_CEVUUE9ZvotKPa4o4PLA

Klaus Rasmussen
Admin
Indlæg: 4846
Tilmeldt: 26. apr 2010, 02:40
IRC nickname: ClaudiuS
Geografisk sted: Nyborg [fyn]

Re: ingen grafik-drivere

Indlægaf Klaus Rasmussen » 7. feb 2014, 17:39

Problemet er efter en reboot genopstået.
Med Venlig Hilsen
Klaus

Kører Ubuntu 20.04 på Lenovo-H515s, 64bit og 20.10 på HP Probook 4520s, 64 bit.
Gratis Ubuntumagasin: http://fullcirclemagazine.org/
MEGA Share: https://mega.nz/#F!XNM1ALpL!G_CEVUUE9ZvotKPa4o4PLA

Tilbage til "Grafik og lyd"

Hvem er online

Brugere der læser dette forum: [Crawler] og 0 gæster