Installer finder ikke SSD og HDD: Ubuntu 16.04 LTS på Lenovo Y520 Emnet er løst

[marie@idiomatic]

Hvis blot du deaktivere fast startup i Windows behøves du ikke at bruge Windows værktøjer til at skrumpe Windows disken (vælger du allerede nu at installere ubuntu som eneste system vil det ikke være nødvendigt og du kan stadig installere Windows fra din usb hvis du vil gå tilbage). Du kan se hvordan her:
https://www.google.com/amp/www.pcadviso ... 021/%3Famp
Resten kan ubuntu selv håndtere.

Ville det ikke i virkeligheden være enklest bare at installere Ubuntu som eneste system med det samme? Jeg mener, hvis du er helt sikker på at jeg stadig vil kunne gå tilbage og installere Windows 10 igen fra USB'en hvis jeg nu alligevel ikke kan få Ubuntu til at virke ordentligt. (Jeg bliver bare så nervøs ved tanken om at der jo altid kan gå noget galt, og tænk hvis der nu var et eller andet galt med USB'en jeg lavede ...).

Jeg er for øvrigt blevet opmærksom på en anden ting fra den anden tråd, hvor han skriver:

You now show two drives, sda as 1TB and a NVMe which is SSD at 512GB.
Not sure if grub will install correctly is 1TB is sda. It supposedly works with NVMe, but grub wants to install to an ESP - efi system partition on sda. If issues with grub installing add an ESP on sda.

Hvordan vil jeg under installationen kunne se om dette bliver et problem? Jeg har tænkt at jeg netop ville installere OS og diverse programmer på SSD'en på 512 GB og bruge disken på 1 TB til data. Men siger manden ikke at grub vil installere på sda, og at SSD'en er sdb? Systemet skulle gerne ende med at køre pænt tjept, så jeg ville være ked af hvis jeg ikke kan installere på SSD'en.

Som jeg forstår det tilgår du uefi indstillingerne ved at trykke på en særlig knap under opstarten (og ikke ved at vælge den fra Windows), i så fald behøves du ikke deaktivere fast boot.

Nej, det tænkte jeg også. Faktisk er det ikke en gang under opstarten at jeg skal trykke på den, men fra slukket tilstand! Det er sådan en lille knap hvor man skal bruge spidsen af en papirclips. Den sidder i venstre side lige ved siden af audiostikket.

Den langsomme opstart kan skyldes at du starter systemet fra en dvd hvilket er et noget sløv, det ville være hurtigere med en USB, dog køre live systemer altid lidt langsommere end Når du har installeret det på computeren.

Ja, men dét jeg mener med langsom opstart, er at den er ekstremt lang tid om at starte op, og dvd'en skiftevis kører og ikke kører (så vidt jeg kan høre) - jeg får indtryk af at den ligesom står og kæmper lidt med at kommer over et eller andet punkt flere gange i processen. Og der kommer jo også stadig fejlmeddelelser undervejs (den oprindelige som du tolkede for mig). Og hvad med de der "warnings" som kommer når jeg kører sudo gdisk -l /dev/sda og sudo gdisk -l /dev/sdb (dét med "partition table overlaps")? Jeg får fornemmelsen af at det alt sammen viser at der stadig er noget galt. Det var også derfor jeg blev så overrasket da du skrev at jeg i princippet skulle kunne installere nu ...

[marie@idiomatic]

Jeg mistænker lidt at din maskine har mere end et grafikkort, selvom det tidligere så ud som om der kun var 1 Intel kort. Det kan være grunden til at du får low graphics. Måske kan det hjælpe at starte med nomodeset :
https://ubuntudanmark.dk/blog/artikler/ ... nomodeset/

Dét med nomodeset forstår jeg ikke umiddelbart så meget af ... er det noget jeg skal prøve at sætte mig ind i nu, eller skal vi vente og se om det bliver nødvendigt? Kan ikke lige regne ud på hvilket trin i processen det i givet fald skal afprøves, og om det i det hele taget er noget jeg bør prøve.

Du tager bare alle de pauser du har brug for, det er jo ikke os der mangler en computer

Det kan der selvfølgelig være noget om. Godt I ser sådan på det

[AJenbo]

Hvor GRUB installeres har næsten igen betydning, det er nærmest kun hvis du på et tidspunkt for lyst til at udskifte HDD'en men ikke SSD'en (Ubuntu ville ikke længere starte), og det finder der også løsninger på som du kan udføre hvis det bliver relevant på et tidspunkt.

Netværks porten i din maskine er rigtig nok kompakt, men hvis du følger vejledningen på side 6 i din manual burde du kunne indsætte et normalt netværks kabel.

Der er meget få ting du kan gøre ved en computer som kan få den i en tilstand du ikke kan komme ud af ved at gen installere operativ systemet, så bare tag den med ro og eksperimenter lidt nå du jo ikke har nogle vigtige filer på systemet
Der er nogle få eksempler på nogle tidlige maskiner med UEFI hvor man helt kunne fjerne mulighed for at starte systemet (selv i dette tilfælde ville det kunne løses af producenten), men det virker ikke til at din maskine har denne fejl.

Jo, det nemmeste ville være bare at installere Ubuntu og vælge at den skal overtage hele systemet. Hvis du vil installere det på SSD'en og fabrikanten har valgt at installere den som den sekundære disk, kan det dog være du skal vælge at lave en manuel opsætning af partitionerne under installationen (det vælg der heder "noget andet").
Selv hvis du ikke har oprettet gendannelses USB'en korrekt eller mister den kan man i dag hente Windows installations disken fra Microsoft som ISO og så installere fra bunden (lisens nøgnen er enkodet i UEFI så aktivering håndteres automatisk).

Som jeg forstår det tilgår du uefi indstillingerne ved at trykke på en særlig knap under opstarten (og ikke ved at vælge den fra Windows), i så fald behøves du ikke deaktivere fast boot.

Nej, det tænkte jeg også. Faktisk er det ikke en gang under opstarten at jeg skal trykke på den, men fra slukket tilstand! Det er sådan en lille knap hvor man skal bruge spidsen af en papirclips. Den sidder i venstre side lige ved siden af audiostikket.

Så tror jeg fint du kan efterlade fast book aktiveret, så starter computeren også hurtigere Jeg har selv fast book atkiveret på mine maskiner og har ikke haft problmer, men jeg har så heller ikke særlig mange bærbar.

[AJenbo]

Den langsomme opstart kan skyldes at du starter systemet fra en dvd hvilket er et noget sløv, det ville være hurtigere med en USB, dog køre live systemer altid lidt langsommere end Når du har installeret det på computeren.

Ja, men dét jeg mener med langsom opstart, er at den er ekstremt lang tid om at starte op, og dvd'en skiftevis kører og ikke kører (så vidt jeg kan høre) - jeg får indtryk af at den ligesom står og kæmper lidt med at kommer over et eller andet punkt flere gange i processen. Og der kommer jo også stadig fejlmeddelelser undervejs (den oprindelige som du tolkede for mig). Og hvad med de der "warnings" som kommer når jeg kører sudo gdisk -l /dev/sda og sudo gdisk -l /dev/sdb (dét med "partition table overlaps")? Jeg får fornemmelsen af at det alt sammen viser at der stadig er noget galt. Det var også derfor jeg blev så overrasket da du skrev at jeg i princippet skulle kunne installere nu ...

Prøv at give os resultatet af følgende kommando lige efter opstart så kan vi se hvad der sker:

Kode: Vælg alt

dmsg

(resultatet er meget langt så nok ikke så godt med en masse billeder her )
Når du indsætter tekst fra terminalen i forummet så tryk på (Code) knappen så koden bliver fremhævet som sådan. Så er den både nemmere at læse og fylder ikke flere sider.

Er du på nettet med maskinen kan du med fordele også bruge pastebinit til at uploade teksten fra terminalen til nettet, så får du blot et link som du kan indsætte i forummet:

Kode: Vælg alt

sudo apt install pastebinit

(installer pastebinit)

Kode: Vælg alt

dmesg | pastebinit

(Send teksten fra dmesg til pastebinit)

[AJenbo]

Jeg er ikke bekendt med at der skulle være to grafikkort - sælgeren sagde i hvert fald ikke noget om det, og jeg kan heller ikke se at der står noget om det på produktsiden. Men hvad ved jeg

Det kan også være jeg bare er blevet lidt forviret efterhånden. Der er vist kun 1 grafikkort og det er et Nvidia Geforce. Noget kraftig hvis ikke du spiller skyde spil på den
Jeg er så temmelig sikker på guiden med NoModeSet ville gøre dig i stand til at starte og installere 17.04, men lad os bare holde os til 16.04 og se om vi kan få Wifi til at virke efter installationen, så kan vi evenuelt prøve NoModeSet+17.04 bagefter hvis det ikke lykkeds.
Du kan lige køre følgende kommando, så kan vi være helt sikkere på din grafikkorts opsætning:

Kode: Vælg alt

lspci -nn | grep -i vga

Jeg tror ikke det er nødvendigt at ændre på AHCI indstillingerne for at starte Windows, men hvis ikke den starter så kan du lige prøve at skifte det tilbage. UEFI/BIOS opdateringen, retter 2 sikkerheds huller og en fejl der kunne se ud til at have med opladeren at gøre. Resten tror jeg ikke bliver relevant for dig. Men så kan du selv vurdere om du har løst til at opdatere UEFI eller ej.

[AJenbo]

Mht til at få systemet installeret på SSD frem for HDD så prøv i første omgang blot at installere Ubuntu på normal vis, så ser vi bagefter på om den blev installeret på den rigtige af de 2 diske eller om du skal lave en nye installation hvor vi vejleder dit til opsætningen af partitionerne.

[marie@idiomatic]

Er nødt til at dele den op, da man åbenbart kun må poste 60000 tegn ad gangen Her kommer første del:

Kode: Vælg alt

ubuntu@ubuntu:~$ dmesg
[    0.000000] Linux version 4.8.0-36-generic (buildd@lgw01-18) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #36~16.04.1-Ubuntu SMP Sun Feb 5 09:39:57 UTC 2017 (Ubuntu 4.8.0-36.36~16.04.1-generic 4.8.11)
[    0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000061c46fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000061c47000-0x0000000061c47fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000061c48000-0x0000000061c48fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000061c49000-0x0000000063177fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000063178000-0x0000000064277fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000064278000-0x000000007a48dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a48e000-0x000000007ae7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007cefe000-0x000000007cefefff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ceff000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x617ac018-0x617d5057] usable ==> usable
[    0.000000] e820: update [mem 0x6179b018-0x617ab057] usable ==> usable
[    0.000000] e820: update [mem 0x6178c018-0x6179a057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006178c017] usable
[    0.000000] reserve setup_data: [mem 0x000000006178c018-0x000000006179a057] usable
[    0.000000] reserve setup_data: [mem 0x000000006179a058-0x000000006179b017] usable
[    0.000000] reserve setup_data: [mem 0x000000006179b018-0x00000000617ab057] usable
[    0.000000] reserve setup_data: [mem 0x00000000617ab058-0x00000000617ac017] usable
[    0.000000] reserve setup_data: [mem 0x00000000617ac018-0x00000000617d5057] usable
[    0.000000] reserve setup_data: [mem 0x00000000617d5058-0x0000000061c46fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000061c47000-0x0000000061c47fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000061c48000-0x0000000061c48fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000061c49000-0x0000000063177fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000063178000-0x0000000064277fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000064278000-0x000000007a48dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000007a48e000-0x000000007ae7dfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000007ae7e000-0x000000007ce7dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000007ce7e000-0x000000007cefdfff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007cefe000-0x000000007cefefff] usable
[    0.000000] reserve setup_data: [mem 0x000000007ceff000-0x000000007fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047effffff] usable
[    0.000000] efi: EFI v2.50 by INSYDE Corp.
[    0.000000] efi:  ACPI 2.0=0x7cefd014  SMBIOS=0x7a702000  SMBIOS 3.0=0x7a700000  ESRT=0x7a6fedd8  PROP=0x61c43bb8
[    0.000000] esrt: Reserving ESRT space from 0x000000007a6fedd8 to 0x000000007a6fee88.
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x47f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007E000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 007D800000 mask 7FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] e820: last_pfn = 0x7ceff max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff8afec0098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x20263b000, 0x20263bfff] PGTABLE
[    0.000000] BRK [0x20263c000, 0x20263cfff] PGTABLE
[    0.000000] BRK [0x20263d000, 0x20263dfff] PGTABLE
[    0.000000] BRK [0x20263e000, 0x20263efff] PGTABLE
[    0.000000] BRK [0x20263f000, 0x20263ffff] PGTABLE
[    0.000000] BRK [0x202640000, 0x202640fff] PGTABLE
[    0.000000] BRK [0x202641000, 0x202641fff] PGTABLE
[    0.000000] BRK [0x202642000, 0x202642fff] PGTABLE
[    0.000000] BRK [0x202643000, 0x202643fff] PGTABLE
[    0.000000] BRK [0x202644000, 0x202644fff] PGTABLE
[    0.000000] BRK [0x202645000, 0x202645fff] PGTABLE
[    0.000000] BRK [0x202646000, 0x202646fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3e4b6000-0x3fffafff]
[    0.000000] Secure boot enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007CEFD014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000007CECC188 00010C (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000007CEEE000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000007CED5000 015BEC (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000007CE5B000 000040
[    0.000000] ACPI: UEFI 0x000000007CEFC000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000007CEFB000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000007CEFA000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF9000 0004C8 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF8000 000046 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: TPM2 0x000000007CEF7000 000034 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEF3000 0030A0 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000007CEF2000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000007CEF1000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000007CEF0000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007CEEF000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000007CEED000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000007CEEC000 0000BC (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000007CEEB000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000007CED4000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WSMT 0x000000007CED3000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CED2000 00029F (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CED1000 000346 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CECD000 003002 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CECB000 00051E (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000007CECA000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBG2 0x000000007CEC9000 000054 (v00 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC8000 0002AF (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC7000 000EDE (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000007CEC2000 00497E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000007CEC1000 0000A8 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000007CEC0000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000007CEBF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x47effb000-0x47effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000061c46fff]
[    0.000000]   node   0: [mem 0x0000000061c49000-0x0000000063177fff]
[    0.000000]   node   0: [mem 0x0000000064278000-0x000000007a48dfff]
[    0.000000]   node   0: [mem 0x000000007cefe000-0x000000007cefefff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047effffff]
[    0.000000] On node 0 totalpages: 4162345
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7695 pages used for memmap
[    0.000000]   DMA32 zone: 492429 pages, LIFO batch:31
[    0.000000]   Normal zone: 57280 pages used for memmap
[    0.000000]   Normal zone: 3665920 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x6178c000-0x6178cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6179a000-0x6179afff]
[    0.000000] PM: Registered nosave memory: [mem 0x6179b000-0x6179bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x617ab000-0x617abfff]
[    0.000000] PM: Registered nosave memory: [mem 0x617ac000-0x617acfff]
[    0.000000] PM: Registered nosave memory: [mem 0x617d5000-0x617d5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x61c47000-0x61c47fff]
[    0.000000] PM: Registered nosave memory: [mem 0x61c48000-0x61c48fff]
[    0.000000] PM: Registered nosave memory: [mem 0x63178000-0x64277fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7a48e000-0x7ae7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ae7e000-0x7ce7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ce7e000-0x7cefdfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ceff000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8b033ec00000 s107864 r8192 d31400 u262144
[    0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4097285
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16216560K/16649380K available (8812K kernel code, 1439K rwdata, 3820K rodata, 1552K init, 1296K bss, 432820K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:2048 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2800.000 MHz processor
[    0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=11200000)
[    0.000022] pid_max: default: 32768 minimum: 301
[    0.000030] ACPI: Core revision 20160422
[    0.030043] ACPI: 11 ACPI AML tables successfully acquired and loaded

[    0.033334] Security Framework initialized
[    0.033335] Yama: becoming mindful.
[    0.033348] AppArmor: AppArmor initialized
[    0.034011] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.036544] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.037657] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.037669] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.037898] CPU: Physical Processor ID: 0
[    0.037898] CPU: Processor Core ID: 0
[    0.037904] mce: CPU supports 10 MCE banks
[    0.037911] CPU0: Thermal monitoring enabled (TM1)
[    0.037930] process: using mwait in idle threads
[    0.037932] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.037933] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.038287] Freeing SMP alternatives memory: 32K (ffffffffadeed000 - ffffffffadef5000)
[    0.044774] ftrace: allocating 33410 entries in 131 pages
[    0.057429] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.057430] smpboot: Max logical packages: 2
[    0.057438] DMAR: Host address width 39
[    0.057439] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.057443] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.057444] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.057447] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.057447] DMAR: RMRR base: 0x0000007ad52000 end: 0x0000007ad71fff
[    0.057448] DMAR: RMRR base: 0x0000007d800000 end: 0x0000007fffffff
[    0.057449] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.057450] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.057451] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.058827] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.058827] x2apic enabled
[    0.058838] Switched APIC routing to cluster x2apic.
[    0.062967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.102657] TSC deadline timer enabled
[    0.102662] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.102665] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.102693] ... version:                4
[    0.102693] ... bit width:              48
[    0.102694] ... generic registers:      4
[    0.102694] ... value mask:             0000ffffffffffff
[    0.102694] ... max period:             0000ffffffffffff
[    0.102695] ... fixed-purpose events:   3
[    0.102695] ... event mask:             000000070000000f
[    0.103438] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.103493] x86: Booting SMP configuration:
[    0.103494] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.120642] x86: Booted up 1 node, 8 CPUs
[    0.120643] smpboot: Total of 8 processors activated (44800.00 BogoMIPS)
[    0.127794] devtmpfs: initialized
[    0.127847] x86/mm: Memory block size: 128MB
[    0.130275] evm: security.selinux
[    0.130275] evm: security.SMACK64
[    0.130275] evm: security.SMACK64EXEC
[    0.130276] evm: security.SMACK64TRANSMUTE
[    0.130276] evm: security.SMACK64MMAP
[    0.130277] evm: security.ima
[    0.130277] evm: security.capability
[    0.130319] PM: Registering ACPI NVS region [mem 0x61c47000-0x61c47fff] (4096 bytes)
[    0.130320] PM: Registering ACPI NVS region [mem 0x63178000-0x64277fff] (17825792 bytes)
[    0.130496] PM: Registering ACPI NVS region [mem 0x7ae7e000-0x7ce7dfff] (33554432 bytes)
[    0.130877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.130912] pinctrl core: initialized pinctrl subsystem
[    0.131068] RTC time: 22:27:41, date: 04/23/17
[    0.131138] NET: Registered protocol family 16
[    0.143427] cpuidle: using governor ladder
[    0.159438] cpuidle: using governor menu
[    0.159441] PCCT header not found.
[    0.159573] Simple Boot Flag at 0x44 set to 0x1
[    0.159588] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.159589] ACPI: bus type PCI registered
[    0.159590] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.159641] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.159643] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.159649] PCI: Using configuration type 1 for base access
[    0.175608] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.175609] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.175774] ACPI: Added _OSI(Module Device)
[    0.175775] ACPI: Added _OSI(Processor Device)
[    0.175775] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.175776] ACPI: Added _OSI(Processor Aggregator Device)
[    0.176753] ACPI: Executed 27 blocks of module-level executable AML code
[    0.182341] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.187414] ACPI: Dynamic OEM Table Load:
[    0.187465] ACPI: SSDT 0xFFFF8B032B8F1800 000651 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.188110] ACPI: Executed 1 blocks of module-level executable AML code
[    0.188171] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.188899] ACPI: Dynamic OEM Table Load:
[    0.188907] ACPI: SSDT 0xFFFF8B032B9B6000 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.189508] ACPI: Executed 1 blocks of module-level executable AML code
[    0.189822] ACPI: Dynamic OEM Table Load:
[    0.189830] ACPI: SSDT 0xFFFF8B032BD29800 00065C (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.190602] ACPI: Executed 1 blocks of module-level executable AML code
[    0.190732] ACPI: Dynamic OEM Table Load:
[    0.190738] ACPI: SSDT 0xFFFF8B032B9AD800 00018A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.191344] ACPI: Executed 1 blocks of module-level executable AML code
[    0.193122] ACPI : EC: EC started
[    0.193337] ACPI: Interpreter enabled
[    0.193377] ACPI: (supports S0 S3 S4 S5)
[    0.193377] ACPI: Using IOAPIC for interrupt routing
[    0.193410] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.193857] ACPI: Power Resource [PG00] (on)
[    0.206934] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.206938] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.209225] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.209226] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.210906] PCI host bridge to bus 0000:00
[    0.210908] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.210909] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.210909] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.210910] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.210911] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.210912] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.210912] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.210913] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.210914] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.210915] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.210915] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.210916] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.210917] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.210918] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.210924] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.211645] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.211678] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.212397] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.212404] pci 0000:00:02.0: reg 0x10: [mem 0xa2000000-0xa2ffffff 64bit]
[    0.212409] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.212413] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.213192] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.213209] pci 0000:00:14.0: reg 0x10: [mem 0xa4400000-0xa440ffff 64bit]
[    0.213268] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.214012] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.214045] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.214060] pci 0000:00:14.2: reg 0x10: [mem 0xa442a000-0xa442afff 64bit]
[    0.214821] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.214841] pci 0000:00:16.0: reg 0x10: [mem 0xa442b000-0xa442bfff 64bit]
[    0.214907] pci 0000:00:16.0: PME# supported from D3hot
[    0.215658] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.215670] pci 0000:00:17.0: reg 0x10: [mem 0xa4428000-0xa4429fff]
[    0.215677] pci 0000:00:17.0: reg 0x14: [mem 0xa442e000-0xa442e0ff]
[    0.215683] pci 0000:00:17.0: reg 0x18: [io  0x5080-0x5087]
[    0.215689] pci 0000:00:17.0: reg 0x1c: [io  0x5088-0x508b]
[    0.215695] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.215702] pci 0000:00:17.0: reg 0x24: [mem 0xa442c000-0xa442c7ff]
[    0.215737] pci 0000:00:17.0: PME# supported from D3hot
[    0.216465] pci 0000:00:1c.0: [8086:a111] type 01 class 0x060400
[    0.216520] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.217234] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.217266] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[    0.217320] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.218030] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.218057] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[    0.218110] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.218819] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.218859] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.218913] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.219627] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.219680] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    0.220489] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.220500] pci 0000:00:1f.2: reg 0x10: [mem 0xa4424000-0xa4427fff]
[    0.221263] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
[    0.221284] pci 0000:00:1f.3: reg 0x10: [mem 0xa4420000-0xa4423fff 64bit]
[    0.221314] pci 0000:00:1f.3: reg 0x20: [mem 0xa4410000-0xa441ffff 64bit]
[    0.221360] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.222100] pci 0000:00:1f.3: System wakeup disabled by ACPI
[    0.222135] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.222181] pci 0000:00:1f.4: reg 0x10: [mem 0xa442d000-0xa442d0ff 64bit]
[    0.222250] pci 0000:00:1f.4: reg 0x20: [io  0x5040-0x505f]
[    0.223070] pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030200
[    0.223078] pci 0000:01:00.0: reg 0x10: [mem 0xa3000000-0xa3ffffff]
[    0.223085] pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.223092] pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.223096] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.223101] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.235495] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.235500] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.235506] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
[    0.235513] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.237302] pci 0000:02:00.0: [1217:8621] type 00 class 0x080501
[    0.237319] pci 0000:02:00.0: reg 0x10: [mem 0xa4301000-0xa4301fff]
[    0.237329] pci 0000:02:00.0: reg 0x14: [mem 0xa4300000-0xa43007ff]
[    0.237442] pci 0000:02:00.0: PME# supported from D3hot D3cold


[marie@idiomatic]

Og så resten:

Kode: Vælg alt

[    0.237486] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.253207] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.253210] pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
[    0.253542] pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
[    0.253576] pci 0000:03:00.0: reg 0x10: [mem 0xa4200000-0xa4201fff 64bit]
[    0.253797] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.253902] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.264077] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.264080] pci 0000:00:1c.2:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.264132] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.264148] pci 0000:04:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.264173] pci 0000:04:00.0: reg 0x18: [mem 0xa4104000-0xa4104fff 64bit]
[    0.264188] pci 0000:04:00.0: reg 0x20: [mem 0xa4100000-0xa4103fff 64bit]
[    0.264272] pci 0000:04:00.0: supports D1 D2
[    0.264273] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.264320] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.275535] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.275540] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.275545] pci 0000:00:1c.3:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.275636] pci 0000:05:00.0: [144d:a804] type 00 class 0x010802
[    0.275653] pci 0000:05:00.0: reg 0x10: [mem 0xa4000000-0xa4003fff 64bit]
[    0.275783] pci 0000:05:00.0: System wakeup disabled by ACPI
[    0.287543] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.287552] pci 0000:00:1d.0:   bridge window [mem 0xa4000000-0xa40fffff]
[    0.288642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288683] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.288722] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288760] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288799] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288837] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288876] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.288914] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.289140] platform MSFT0101:00: failed to claim resource 1
[    0.289144] acpi MSFT0101:00: platform device creation failed: -16
[    0.289250] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.289287] ACPI : EC: EC stopped
[    0.289375] ACPI : EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[    0.289375] ACPI : EC: EC started
[    0.289732] SCSI subsystem initialized
[    0.289758] libata version 3.00 loaded.
[    0.289785] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.289788] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.289790] vgaarb: loaded
[    0.289790] vgaarb: bridge control possible 0000:00:02.0
[    0.289803] ACPI: bus type USB registered
[    0.289814] usbcore: registered new interface driver usbfs
[    0.289819] usbcore: registered new interface driver hub
[    0.289835] usbcore: registered new device driver usb
[    0.323877] PCI: Using ACPI for IRQ routing
[    0.351783] PCI: pci_cache_line_size set to 64 bytes
[    0.355755] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.355755] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.355756] e820: reserve RAM buffer [mem 0x6178c018-0x63ffffff]
[    0.355757] e820: reserve RAM buffer [mem 0x6179b018-0x63ffffff]
[    0.355758] e820: reserve RAM buffer [mem 0x617ac018-0x63ffffff]
[    0.355759] e820: reserve RAM buffer [mem 0x61c47000-0x63ffffff]
[    0.355759] e820: reserve RAM buffer [mem 0x63178000-0x63ffffff]
[    0.355760] e820: reserve RAM buffer [mem 0x7a48e000-0x7bffffff]
[    0.355760] e820: reserve RAM buffer [mem 0x7ceff000-0x7fffffff]
[    0.355761] e820: reserve RAM buffer [mem 0x47f000000-0x47fffffff]
[    0.355836] NetLabel: Initializing
[    0.355836] NetLabel:  domain hash size = 128
[    0.355836] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.355848] NetLabel:  unlabeled traffic allowed by default
[    0.355955] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.355959] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.358011] clocksource: Switched to clocksource hpet
[    0.363456] VFS: Disk quotas dquot_6.6.0
[    0.363470] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.363537] AppArmor: AppArmor Filesystem Enabled
[    0.363566] pnp: PnP ACPI init
[    0.363677] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.363679] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.363680] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.363681] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
[    0.363682] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.363683] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.363684] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.363686] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.363936] system 00:01: [io  0x2000-0x20fe] has been reserved
[    0.363937] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364089] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.364090] system 00:02: [io  0xffff] has been reserved
[    0.364091] system 00:02: [io  0xffff] has been reserved
[    0.364092] system 00:02: [io  0xffff] has been reserved
[    0.364093] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.364094] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.364096] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364168] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.364170] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.364188] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.364217] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.364219] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.364246] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.364265] pnp 00:07: Plug and Play ACPI device, IDs ETD067c PNP0f03 (active)
[    0.365095] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365510] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.365511] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.365512] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.365513] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.365514] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.365515] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.365516] system 00:09: [mem 0xfed45000-0xfed8ffff] could not be reserved
[    0.365517] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.365518] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.365519] system 00:09: [mem 0x80000000-0x8001ffff] has been reserved
[    0.365521] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.365737] pnp: PnP ACPI: found 10 devices
[    0.372484] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.372486] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.372513] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[    0.372514] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[    0.372515] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.372516] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
[    0.372518] pci 0000:00:01.0:   bridge window [mem 0xa3000000-0xa3ffffff]
[    0.372520] pci 0000:00:01.0:   bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.372523] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.372526] pci 0000:00:1c.0:   bridge window [mem 0xa4300000-0xa43fffff]
[    0.372531] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.372534] pci 0000:00:1c.2:   bridge window [mem 0xa4200000-0xa42fffff]
[    0.372539] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.372540] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.372543] pci 0000:00:1c.3:   bridge window [mem 0xa4100000-0xa41fffff]
[    0.372547] pci 0000:00:1d.0: PCI bridge to [bus 05]
[    0.372550] pci 0000:00:1d.0:   bridge window [mem 0xa4000000-0xa40fffff]
[    0.372556] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.372556] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.372557] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.372558] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.372559] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.372560] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.372560] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.372561] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.372562] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.372563] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.372563] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.372564] pci_bus 0000:00: resource 15 [mem 0x80000000-0xdfffffff window]
[    0.372565] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window]
[    0.372566] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.372567] pci_bus 0000:01: resource 1 [mem 0xa3000000-0xa3ffffff]
[    0.372568] pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
[    0.372568] pci_bus 0000:02: resource 1 [mem 0xa4300000-0xa43fffff]
[    0.372569] pci_bus 0000:03: resource 1 [mem 0xa4200000-0xa42fffff]
[    0.372570] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.372571] pci_bus 0000:04: resource 1 [mem 0xa4100000-0xa41fffff]
[    0.372572] pci_bus 0000:05: resource 1 [mem 0xa4000000-0xa40fffff]
[    0.372594] NET: Registered protocol family 2
[    0.372725] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.372880] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.372960] TCP: Hash tables configured (established 131072 bind 65536)
[    0.372979] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.373011] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.373060] NET: Registered protocol family 1
[    0.373070] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.378452] PCI: CLS 64 bytes, default 64
[    0.378483] Trying to unpack rootfs image as initramfs...
[    4.957108] Freeing initrd memory: 27924K (ffff8afefe4b6000 - ffff8afeffffb000)
[    4.957131] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.957132] software IO TLB [mem 0x75f24000-0x79f24000] (64MB) mapped at [ffff8aff35f24000-ffff8aff39f23fff]
[    4.957226] Scanning for low memory corruption every 60 seconds
[    4.957519] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    4.957537] audit: initializing netlink subsys (disabled)
[    4.957547] audit: type=2000 audit(1492986464.928:1): initialized
[    4.957819] Initialise system trusted keyrings
[    4.957912] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    4.959029] zbud: loaded
[    4.959355] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.959527] fuse init (API version 7.25)
[    4.959630] Allocating IMA blacklist keyring.
[    4.961223] Key type asymmetric registered
[    4.961224] Asymmetric key parser 'x509' registered
[    4.961250] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    4.961282] io scheduler noop registered
[    4.961283] io scheduler deadline registered (default)
[    4.961289] io scheduler cfq registered
[    4.962087] aer 0000:00:1c.0:pcie002: service driver aer loaded
[    4.962112] aer 0000:00:1d.0:pcie002: service driver aer loaded
[    4.962130] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    4.962131] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.962134] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
[    4.962140] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    4.962141] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    4.962143] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    4.962156] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    4.962157] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    4.962162] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    4.962174] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    4.962175] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    4.962177] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[    4.962183] pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
[    4.962183] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    4.962185] pcie_pme 0000:00:1d.0:pcie001: service driver pcie_pme loaded
[    4.962191] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.962194] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.962217] efifb: probing for efifb
[    4.962228] efifb: framebuffer at 0xb0000000, using 8100k, total 8100k
[    4.962228] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    4.962229] efifb: scrolling: redraw
[    4.962229] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    4.965595] Console: switching to colour frame buffer device 240x67
[    4.968867] fb0: EFI VGA frame buffer device
[    4.968872] intel_idle: MWAIT substates: 0x11142120
[    4.968873] intel_idle: v0.4.1 model 0x9E
[    4.969181] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.969252] ACPI: AC Adapter [ADP0] (on-line)
[    4.969301] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    4.969327] ACPI: Lid Switch [LID0]
[    4.969352] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    4.969354] ACPI: Power Button [PWRB]
[    4.969378] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.969379] ACPI: Power Button [PWRF]
[    4.969801] GHES: HEST is not enabled!
[    4.969874] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.971456] Linux agpgart interface v0.103
[    4.974075] brd: module loaded
[    4.975083] loop: module loaded
[    4.975224] libphy: Fixed MDIO Bus: probed
[    4.975225] tun: Universal TUN/TAP device driver, 1.6
[    4.975225] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.975254] PPP generic driver version 2.4.2
[    4.975286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.975287] ehci-pci: EHCI PCI platform driver
[    4.975294] ehci-platform: EHCI generic platform driver
[    4.975300] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.975301] ohci-pci: OHCI PCI platform driver
[    4.975306] ohci-platform: OHCI generic platform driver
[    4.975311] uhci_hcd: USB Universal Host Controller Interface driver
[    4.975433] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.975437] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.976516] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    4.976520] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.976595] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.976596] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.976597] usb usb1: Product: xHCI Host Controller
[    4.976598] usb usb1: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
[    4.976598] usb usb1: SerialNumber: 0000:00:14.0
[    4.976678] hub 1-0:1.0: USB hub found
[    4.976693] hub 1-0:1.0: 16 ports detected
[    4.986810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.986812] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.986833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    4.986833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.986834] usb usb2: Product: xHCI Host Controller
[    4.986835] usb usb2: Manufacturer: Linux 4.8.0-36-generic xhci-hcd
[    4.986835] usb usb2: SerialNumber: 0000:00:14.0
[    4.986945] hub 2-0:1.0: USB hub found
[    4.986954] hub 2-0:1.0: 8 ports detected
[    4.990097] usb: port power management may be unreliable
[    4.992231] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    4.996289] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.996291] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.996473] mousedev: PS/2 mouse device common for all mice
[    4.996787] rtc_cmos 00:04: RTC can wake from S4
[    4.997220] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    4.997303] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.997307] i2c /dev entries driver
[    4.997348] device-mapper: uevent: version 1.0.3
[    4.997443] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    4.997445] intel_pstate: Intel P-state driver initializing
[    4.998122] intel_pstate: HWP enabled
[    4.998526] ledtrig-cpu: registered to indicate activity on CPUs
[    4.998527] EFI Variables Facility v0.08 2004-May-17
[    5.005682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.029315] NET: Registered protocol family 10
[    5.029594] NET: Registered protocol family 17
[    5.029598] Key type dns_resolver registered
[    5.029869] microcode: sig=0x906e9, pf=0x20, revision=0x48
[    5.030184] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.032218] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[    5.032231] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[    5.032233] EFI: Problem loading in-kernel X.509 certificate (-65)
[    5.034077] EFI: Loaded cert 'MEDION Certificate: 8742f4c8e657b4a44f303df3728573a7' linked to '.builtin_trusted_keys'
[    5.034599] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[    5.035874] registered taskstats version 1
[    5.035876] Loading compiled-in X.509 certificates
[    5.038088] Loaded X.509 cert 'Build time autogenerated kernel key: d6d7cea0e8f669bd202f07c56eca22a865778209'
[    5.038106] zswap: loaded using pool lzo/zbud
[    5.047158] Key type big_key registered
[    5.048258] Key type trusted registered
[    5.049412] Key type encrypted registered
[    5.049413] AppArmor: AppArmor sha1 policy hashing enabled
[    5.049414] ima: No TPM chip found, activating TPM-bypass!
[    5.049424] evm: HMAC attrs: 0x1
[    5.052085]   Magic number: 13:975:502
[    5.052306] rtc_cmos 00:04: setting system clock to 2017-04-23 22:27:46 UTC (1492986466)
[    5.052381] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.052382] EDD information not available.
[    5.067570] ACPI: Battery Slot [BAT0] (battery present)
[    5.068399] Freeing unused kernel memory: 1552K (ffffffffadd69000 - ffffffffadeed000)
[    5.068399] Write protecting the kernel read-only data: 14336k
[    5.068815] Freeing unused kernel memory: 1412K (ffff8b00c1c9f000 - ffff8b00c1e00000)
[    5.069213] Freeing unused kernel memory: 276K (ffff8b00c21bb000 - ffff8b00c2200000)
[    5.073516] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    5.081928] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.081969] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.081976] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.081983] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.082335] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.082351] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.083137] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.083163] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.083171] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.083325] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.101208] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    5.106368] hidraw: raw HID events driver (C) Jiri Kosina
[    5.109072] wmi: Mapper loaded
[    5.118737] sdhci: Secure Digital Host Controller Interface driver
[    5.118738] sdhci: Copyright(c) Pierre Ossman
[    5.119281] ahci 0000:00:17.0: version 3.0
[    5.120159] sdhci-pci 0000:02:00.0: SDHCI controller found [1217:8621] (rev 1)
[    5.122041] mmc0: Unknown controller version (3). You may experience problems.
[    5.122379] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.122383] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.123053] [drm] Initialized drm 1.1.0 20060810
[    5.125309] nvme nvme0: pci function 0000:05:00.0
[    5.127644] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
[    5.129618] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x4 impl SATA mode
[    5.129620] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[    5.130053] scsi host0: ahci
[    5.130141] scsi host1: ahci
[    5.130218] scsi host2: ahci
[    5.130243] ata1: DUMMY
[    5.130243] ata2: DUMMY
[    5.130245] ata3: SATA max UDMA/133 abar m2048@0xa442c000 port 0xa442c200 irq 320
[    5.132556] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc222818f4000, c8:5b:76:df:89:d8, XID 10900800 IRQ 322
[    5.132557] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.154910] [drm] Memory usable by graphics device = 4096M
[    5.154912] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
[    5.154935] fb: switching to inteldrmfb from EFI VGA
[    5.154953] Console: switching to colour dummy device 80x25
[    5.155017] [drm] Replacing VGA console driver
[    5.156505] r8169 0000:04:00.0 enp4s0: renamed from eth0
[    5.157389] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    5.157419] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    5.157460] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)
[    5.157543] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[    5.157544] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    5.157545] nouveau: detected PR support, will not use DSM
[    5.157556] nouveau 0000:01:00.0: enabling device (0106 -> 0107)
[    5.157653] nouveau 0000:01:00.0: unknown chipset (137000a1)
[    5.157657] nouveau: probe of 0000:01:00.0 failed with error -12
[    5.161131] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.161131] [drm] Driver supports precise vblank timestamp query.
[    5.169496] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
[    5.169497] i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management.
[    5.170129] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.177944] [drm] GuC firmware load skipped
[    5.312232] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    5.351588]  nvme0n1: p1 p2 p3 p4 p5
[    5.413239] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    5.413245] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    5.413366] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[    5.415495] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.415587] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    5.415678] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    5.443323] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.455627] usb 1-1: New USB device found, idVendor=093b, idProduct=0045
[    5.455628] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.455628] usb 1-1: Product: DVDR   PX-740A 
[    5.455629] usb 1-1: Manufacturer: PLEXTOR         
[    5.455630] usb 1-1: SerialNumber: 00D0A905301202155
[    5.457962] usb-storage 1-1:1.0: USB Mass Storage device detected
[    5.458485] scsi host3: usb-storage 1-1:1.0
[    5.458576] usbcore: registered new interface driver usb-storage
[    5.572906] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    5.644474] fbcon: inteldrmfb (fb0) is primary device
[    5.745329] random: fast init done
[    5.749143] usb 1-6: New USB device found, idVendor=5986, idProduct=06b0
[    5.749144] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    5.749145] usb 1-6: Product: EasyCamera
[    5.749145] usb 1-6: Manufacturer: Bison
[    5.749146] usb 1-6: SerialNumber: 151027
[    5.769575] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x6d4f00)
[    5.785769] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0c.
[    5.801759] psmouse serio1: elantech: Elan sample query result 02, 2d, a8
[    5.827973] ata3.00: ATA-10: ST1000LM035-1RK172, LVM1, max UDMA/133
[    5.827973] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.869777] usb 1-11: new full-speed USB device number 4 using xhci_hcd
[    5.878747] ata3.00: configured for UDMA/133
[    5.879094] scsi 2:0:0:0: Direct-Access     ATA      ST1000LM035-1RK1 LVM1 PQ: 0 ANSI: 5
[    5.890439] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    5.926491] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    5.926504] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    5.926505] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    5.926766] sd 2:0:0:0: [sda] Write Protect is off
[    5.926767] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.926914] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.978085] tsc: Refined TSC clocksource calibration: 2808.000 MHz
[    5.978100] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    5.989987]  sda: sda1 sda2
[    5.990777] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.012912] usb 1-11: New USB device found, idVendor=8087, idProduct=0a2b
[    6.012913] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.496676] scsi 3:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-740A   1.01 PQ: 0 ANSI: 0
[    6.499987] sr 3:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[    6.499987] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.500149] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    6.500277] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    6.877884] [drm] RC6 on
[    6.964438] Console: switching to colour frame buffer device 240x67
[    6.983606] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.009349] clocksource: Switched to clocksource tsc
[    8.956260] random: crng init done
[    9.347026] ISO 9660 Extensions: Microsoft Joliet Level 3
[    9.350958] ISO 9660 Extensions: RRIP_1991A
[    9.393860] aufs 4.x-rcN-20160912
[   37.918308] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   37.918433] systemd[1]: Detected architecture x86-64.
[   37.918572] systemd[1]: Set hostname to <ubuntu>.
[   37.918667] systemd[1]: Initializing machine ID from random generator.
[   38.562453] systemd[1]: Listening on udev Kernel Socket.
[   38.562535] systemd[1]: Created slice User and Session Slice.
[   38.562554] systemd[1]: Listening on LVM2 poll daemon socket.
[   38.562600] systemd[1]: Listening on Journal Audit Socket.
[   38.562619] systemd[1]: Listening on Journal Socket (/dev/log).
[   38.562658] systemd[1]: Created slice System Slice.
[   44.291716] systemd-journald[1154]: Received request to flush runtime journal from PID 1
[   45.668553] lp: driver loaded but no devices found
[   45.761378] ppdev: user-space parallel port driver
[   52.209060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   59.207953] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[   61.038161] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[   61.040570] AVX2 version of gcm_enc/dec engaged.
[   61.040570] AES CTR mode by8 optimization enabled
[   62.208954] media: Linux media interface: v0.10
[   63.914109] Linux video capture interface: v2.00
[   66.917869] Intel(R) Wireless WiFi driver for Linux
[   66.917869] Copyright(c) 2003- 2015 Intel Corporation
[   66.923003] Bluetooth: Core ver 2.21
[   66.923009] NET: Registered protocol family 31
[   66.923009] Bluetooth: HCI device and connection manager initialized
[   66.923011] Bluetooth: HCI socket layer initialized
[   66.923012] Bluetooth: L2CAP socket layer initialized
[   66.923015] Bluetooth: SCO socket layer initialized
[   67.293406] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
[   67.293430] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
[   67.355378] uvcvideo: Found UVC 1.00 device EasyCamera (5986:06b0)
[   67.357637] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[   67.357638] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[   67.357639] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[   67.357640] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[   67.357680] input: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9
[   67.357713] usbcore: registered new interface driver uvcvideo
[   67.357714] USB Video Class driver (1.1.1)
[   67.913036] usbcore: registered new interface driver btusb
[   67.913722] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[   67.914735] Bluetooth: hci0: Device revision is 16
[   67.914735] Bluetooth: hci0: Secure boot is enabled
[   67.914736] Bluetooth: hci0: OTP lock is enabled
[   67.914736] Bluetooth: hci0: API lock is enabled
[   67.914737] Bluetooth: hci0: Debug lock is disabled
[   67.914737] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   68.391373] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2
[   68.391375] Bluetooth: hci0: Failed to load Intel firmware file (-2)
[   68.392287] Bluetooth: HCI UART driver ver 2.3
[   68.392287] Bluetooth: HCI UART protocol H4 registered
[   68.392288] Bluetooth: HCI UART protocol BCSP registered
[   68.392288] Bluetooth: HCI UART protocol LL registered
[   68.392288] Bluetooth: HCI UART protocol ATH3K registered
[   68.392289] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   68.392308] Bluetooth: HCI UART protocol Intel registered
[   68.392314] Bluetooth: HCI UART protocol BCM registered
[   68.392315] Bluetooth: HCI UART protocol QCA registered
[   68.392315] Bluetooth: HCI UART protocol AG6XX registered
[   73.080062] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   73.358209] kvm: disabled by bios
[   77.525055] intel_rapl: Found RAPL domain package
[   77.525057] intel_rapl: Found RAPL domain core
[   77.525058] intel_rapl: Found RAPL domain uncore
[   77.525060] intel_rapl: Found RAPL domain dram
[   77.529700] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   77.529702] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   77.529703] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   77.529704] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   77.529705] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   77.529706] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
[   77.529707] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   79.007876] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[   79.007915] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[   79.007949] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   79.007981] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   79.008011] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[   83.353054] iwlwifi 0000:03:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
[  100.005763] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[  100.008179] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[  100.009031] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[  100.574721] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[  100.574911] thermal thermal_zone1: failed to read out thermal zone (-5)
[  123.623520] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[  123.624563] Bluetooth: hci0: Device revision is 16
[  123.624563] Bluetooth: hci0: Secure boot is enabled
[  123.624564] Bluetooth: hci0: OTP lock is enabled
[  123.624564] Bluetooth: hci0: API lock is enabled
[  123.624564] Bluetooth: hci0: Debug lock is disabled
[  123.624565] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[  123.624594] bluetooth hci0: Direct firmware load for intel/ibt-12-16.sfi failed with error -2
[  123.624595] Bluetooth: hci0: Failed to load Intel firmware file (-2)
[  123.934921] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[  129.093877] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  129.093878] Bluetooth: BNEP filters: protocol multicast
[  129.093880] Bluetooth: BNEP socket layer initialized
[  130.567289] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  130.984292] r8169 0000:04:00.0 enp4s0: link down
[  130.984343] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[  131.209911] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
ubuntu@ubuntu:~$

[marie@idiomatic]

For øvrigt tog jeg tid denne gang, og opstarten tog 5-6 minutter.

[marie@idiomatic]

Kode: Vælg alt

ubuntu@ubuntu:~$ lspci -nn | grep -i vga
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:591b] (rev 04)
ubuntu@ubuntu:~$

Jeg begynder at blive helt god til det her copy-paste-halløj

Ja, grafikkortet er rigelig kraftigt, men det fulgte med når jeg ville have i7 og 16 GB RAM og en hurtig harddisk ... sådan er det vel med bærbare, som man jo ikke selv sammensætter.

[marie@idiomatic]

Jeg er så temmelig sikker på guiden med NoModeSet ville gøre dig i stand til at starte og installere 17.04, men lad os bare holde os til 16.04 og se om vi kan få Wifi til at virke efter installationen, så kan vi evenuelt prøve NoModeSet+17.04 bagefter hvis det ikke lykkeds.

Altså, hvis du mener det er bedre at prøve 17.04 med NoModeSet først, kan vi også gøre dét. Jeg har bare lidt svært ved at forstå vejledningen ... men tror du det ville give et bedre resultat? For så er det da dér vi skal begynde.

Men er der mere jeg skal teste lige nu, mens live-systemet kører? For ellers vil jeg (prøve at) boote Windows nu for at opdatere UEFI og slå Fast Startup fra.

[marie@idiomatic]

Nå, jeg holder for i aften. Håber i morgen bliver dagen hvor det lykkes!

[AJenbo]

dmsg beskeden ser ud til at linux starter i loebet af ca. 2 minutter, der er ca 30 sekunder hvor den venter paa data fra dvden, og jeg vil tro de oevrige 3-4 minutter er det samme, foer og efter opstarten af Linux. 5-6 minutter viker meget normalt for at koere et system fra en DVD, det at dvden starter og stopper sker i takt med at den behanlder data og henter yderligere data og er en af grundende til at det er saa langsomt at koere et system fra en dvd.

Som sagt syndes jeg vil skal proeve 16.04 foerst. Det virker til at det er den du bliver gladest for og som er mindst besvaerlig at installere for dig.

dmsg indiker ogsaa igen at du har 2 grafikkort, din lspci viser godt nok kun et intel grafikkort men Lenovos side siger at der er et Geforce 1050 i din maskine saa jeg tror du har faaet dig en maskine med to grafikkort.

Hvis du skulle teste noget yderligere ville det vaere om wifi virker i 17.04, du skriver at du har svaert ved at forstaa nomodeset guiden, men hvis ikke du skriver hvad det er du gaaer i staa paa saa kan jeg ikke hjaelpe saa meget mere end at gentage hele guiden som den er nu. For at teste WIfi behoeves du kun udfoere det der staaer op til det 2. billede i guiden.

[marie@idiomatic]

Jeg tror ikke det er nødvendigt at ændre på AHCI indstillingerne for at starte Windows, men hvis ikke den starter så kan du lige prøve at skifte det tilbage. UEFI/BIOS opdateringen, retter 2 sikkerheds huller og en fejl der kunne se ud til at have med opladeren at gøre. Resten tror jeg ikke bliver relevant for dig. Men så kan du selv vurdere om du har løst til at opdatere UEFI eller ej.

Nu har jeg opdateret UEFI og slået Fast Startup fra. (Og jo, jeg var nødt til at ændre AHCI tilbage først).

Og du havde ret i at jeg godt kan bruge et almindeligt netkabel - jeg havde ikke lige gennemskuet at "bunden" af porten kunne vippes ned, og at det var dét de mente med "the RJ-45 cover".

Super at opstartstiden og de skiftende lyde fra dvd-drevet ikke bør bekymre mig.

Godt, men så prøver jeg at installere 16.04.2 LTS - og så kan jeg jo lige så godt vente med at teste om wifi virker i 17.04, til hvis det bliver nødvendigt. Ja, du har ret, jeg er selvfølgelig nødt til at skrive hvad det er jeg ikke forstår i nomodeset-guiden, hvis du skal kunne hjælpe mig. Men det kan vi lige så godt gemme nu og se om det bliver nødvendigt, ikke? Jeg mener, hvis jeg ikke skal bruge det i forbindelse med 16.04.2 LTS (og det var vist bl.a. dét jeg ikke forstod - altså hvad det helt præcis skulle bruges til).

dmsg indiker ogsaa igen at du har 2 grafikkort, din lspci viser godt nok kun et intel grafikkort men Lenovos side siger at der er et Geforce 1050 i din maskine saa jeg tror du har faaet dig en maskine med to grafikkort.

Okay! Jamen så ved jeg det. Sjovt at sælgeren slet ikke nævnte det. Men så håber jeg at 16.04.2 LTS er ligeglad ...

Snak nok ... jeg må hellere kaste mig ud i det (større kylling skal man lede længe efter, tror jeg - hver gang jeg skal i gang med en ny proces, skal jeg lige tage en dyb indånding og tænke det hele igennem én gang til ... men det hjælper helt klart rigtig meget at du har skrevet at det ikke så nemt kan gå uopretteligt galt ).

[AJenbo]

Sælger nævner nok kun det kraftige grafikkort, det andet ses som en strømbesparende funktion. Men Linux driverne er desværre stadig ikke helt på plads til automatisk at kunne skiftet mellem flere grafikkort uden problemer.

Efter du har installeret systemet, så kør lige opdaterings håndteringen og se om netværket så virker. Hvis det stadig ikke virker efter en genstart så giv lige info fra denne kommando:

Kode: Vælg alt

dpkg --list | grep linux
dmsg | grep error

Glæder mig til at høre hvordan det er gået